Business > Industrial Devices > Automation Controls Top > HL-C1C-M

HL-C1C-M | Ultra High-speed Laser Displacement Sensor HL-C1(Discontinued)

CAD data　 Catalogs　 Manuals　 Software
FAQ

*Photo may vary from actual product.

Discontinued
September 30, 2015

Product Number	HL-C1C-M
Part Number	HL-C1C-M
Product	Ultra High-speed Laser Displacement Sensor [CCD Style]
Details	Controller
Product name	Ultra High-speed Laser Displacement Sensor HL-C1(Discontinued)

-
-
-
Sorry, no suggested alternative products.

Spec Detail As of September 30, 2015

Item	Specifications
Product Number	HL-C1C-M
Part Number	HL-C1C-M
Connectale sensor head	Maximum 2 sensor heads
Supply voltage	24 V DC plus or minus 10 % including ripple 0.5 V (P-P)
Current consumption	When 1 sensor is connected: 430 mA approx. When 2 sensors are connected: 550 mA approx.
Sampling rate	Selectable from 100 micro s / 144 micro s / 200 micro s / 255 micro s / 332 micro s / 498 micro s / 1,000 micro s
Temprerature characteristics	plus or minus 0.01 % F.S./degrees
Analog output : Voltage	Output voltage: plus or minus 5 V/F.S. [default setting when diffuse reflective mode is selected (Note) ] Output range: -10.9 to +10.9 V Output current: Max. 2 mA, Output impedance: 50 Ohm (Note) If specular reflective mode is selected, then the default setting is plus or minus 4 V/F.S.
Analog output : Current	Output current: 4 to 20 mA/F.S. [default setting when diffuse reflective mode is selected (Note 2)] Output range: 0 to 29.5 mA (maximum of 25 mA at max. load impedance) Load impedance: 250 Ohm or less (Note 1) The maximum analog output current will vary with load impedance. (Note 2) If specular reflective mode is selected, then the default setting is 5.6 to 18.4 mA/F.S.
Alarm output	Photo-MOS relay - Maximum load current: 50 mA - Applied voltage: 30 V DC or less (between alarm output and COM) - ON impedance: 35 Ohm or less - Operation time: Max. 2 ms
Alarm output : Output operation	Opened when the amount of light is excessive or insufficient.
Alarm output : Short-circuit protection	Incorporated
Judgment outputs (O1, O2)	Photo-MOS relay - Maximum load current: 50 mA - Applied voltage: 30 V DC or less (between judgment output and COM) - ON impedance: 35 Ohm or less - Operation time: Max. 2 ms
Judgment outputs (O1, O2) : Utilization category	DC-12 or DC-13
Judgment outputs (O1, O2) : Output operation	Opened or closed when the threshold value is reached. Determined based on judgment output mode selection. (The threshold value varies with the hysteresis setting.)
Judgment outputs (O1, O2) : Short-circuit protection	Incorporated
Serial input / output	RS-232C
Timing input (Laser emission)	Laser emission stops or continues when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input or there is an open circuit: determined based on input mode selection.
Zero set ON input	Zero set: ON when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input
Zero set OFF input	Zero set: OFF when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input
Indicators : Laser emission	Green LED (lights up during laser emission from sensor head 1 or sensor head 2, or immediately before laser emission)
Indicators : BRIGHT	Red LED (lights up upon disabled measurement due to excessive light at sensor head 1 or 2)
Indicators : DARK	Red LED (lights up upon disabled measurement due to insufficient light at sensor head 1 or 2)
Calibration : Shift	plus or minus 20.0000 mm plus or minus 0.787 in (Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface.
Calibration : Span	0.9000 to 1.1000 (Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface.
Average number of samples	OFF, 2 to 32,768 times (16 steps) (Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface.
Digital filters	High pass: OFF, 10 to 2,000 Hz (9 steps) Low pass: OFF, 10 to 2,000 Hz (9 steps) (Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface.
Calculation functions	L plus or minus KA, L plus or minus KB, L plus or minus K (A plus or minus B) A, B: Sensor head 1, Sensor head 2 measurement values, L = plus or minus 999.9999, K = 0.0001 to 99.9999 (Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface.
Hold functions	Selectable from NORMAL / P-P / PEAK / VALLEY (Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface.
Environmental resistance : Ambient temperature	0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit
Environmental resistance : Ambient humidity	35 to 85 % RH, Storage: 35 to 85 % RH
Environmental resistance : Vibration resistance	10 to 55 Hz frequency (period: 1 min.) 0.75 mm 0.030 in amplitude in X,Y and Z directions for 30 min. each
Environmental resistance : Shock resistance	196 m/s2 (20 G approx.) in X, Y and Z directions for 3 times each
Cable length	Power line: Less than 10 m 32.808 ft Signal line: Less than 30 m 98.425 ft
Weight	Net weight: 300 g approx.
Accessory	-