Business > Industrial Devices > Automation Controls Top > LA-510

LA-510 | Laser Collimated Beam Sensor LA(Discontinued)

CAD data　 Catalogs　 Manuals　 Software
FAQ

*Photo may vary from actual product.

Discontinued
September 30, 2018

Product Number	LA-510
Part Number	LA-510
Product	Laser Collimated Beam Sensor
Details	Class 1 type
Product name	Laser Collimated Beam Sensor LA(Discontinued)

Ultra-compact Laser Collimated Beam Sensor HL-T1
HL-T1010A
HL-T1010A
Recommended replacement is required not only sensor head but also controller (HL-AC1).
Recommended replacement is different in sensing width, size, or analog output characteristics.

Spec Detail As of September 30, 2018

Item	Specifications
Product Number	LA-510
Part Number	LA-510
Regulatory compliance	EMC Directive, RoHS Directive
Type	Class 1 type
Conforming standards / regulations	IEC and JIS standards
Beam width	15 mm 0.591 in
Sensing range	500 mm 19.685 in
Min. sensing object	ø0.1 mm ø0.004 in opaque object
Repeatability	10 micro m 0.394 mil or less
Supply voltage	12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption	Emitter: 35 mA or less, Receiver: 25 mA or less
Comparative output	NPN open-collector transistor -Maximum sink current: 100 mA -Applied voltage: 30 V DC or less (between comparative output and 0 V) -Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Comparative output : Utilization category	DC-12 or DC-13
Comparative output : Response time	0.5 ms or less
Comparative output : Output operation	ON when the incident beam amount is less than the threshold level
Comparative output : Short-circuit protection	Incorporated
Analog output	Analog voltage -Output voltage: 1 V (Darkest) to 5 V (Lightest) -Output impedance: 75 Ohm
Analog output : Slew rate	8 V/ms or more
Analog output : Temperature characteristics	Within plus or minus 0.1 % F.S./degrees (with respect to sensing range at ambient temperature +20 degrees +68 degrees Fahrenheit )
Remote interlock input	Laser is emitted when it is connected to 0 V, but not emitted when connected to +V or kept open
Indicators : Operation	Red LED (lights up when the comparative output is ON)
Indicators : Laser emission warning	Red LED (lights up when laser is being emitted)
Indicators : Stable incident beam	Green LED (lights up under the stable light received condition)
Indicators : Laser beam alignment	Yellow LED x 4 (light up when laser beam is misaligned)
Adjusters : Threshold level	Adjustment of threshold level for the comparative output, 18-turn endless adjuster
Adjusters : Span	Adjustment of span for the analog voltage output, 18-turn endless adjuster
Pollution degree	3 (Industrial environment)
Environmental resistance : Ambient temperature	0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit
Environmental resistance : Ambient humidity	35 to 85 % RH, Storage: 35 to 85 % RH
Environmental resistance : Ambient illuminance	Incandescent light: 10,000 ℓx or less at the light-receiving face
Insulation resistance	20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Environmental resistance : Vibration resistance	10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
Environmental resistance : Shock resistance	500 m/² acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element	Infrared semiconductor laser diode (Maximum output: 1.7 mW, Peak emission wavelength: 780 nm 0.031 mil)
Enclosure earthing	Capacitor earth
Material	Enclosure: Die-cast zinc alloy Top cover: PPO Front protection cover: Glass
Cable	0.2 mm2 5-core (emitter: 4-core) shielded cable, 3 m 9.843 ft long
Cable extension	Extension up to total 50 m 164.042 ft is possible, for both emitter and receiver, with 0.3 mm2, or more, cable. (Synchronization wire cannot be extended.) (Note) LA-510 and LA-511 are CE compliant and complies with EMC directives. EN 61000-6-2 is the applicable standard that covers immunities relating to use of this product, but in order to comply with this standard, the following conditions must be satisfied. -This sensor should be connected less than 10 m 32.808 ft from the power supply. -The signal line to connect with this sensor should be less than 30 m 98.425 ft.
Weight	Emitter: 290 g approx., Receiver: 280 g approx.
Accessory	MS-LA1 (Sensor mounting bracket): 1 set for emitter and receiver Adjusting screwdriver: 1 pc. Crimp contact: 2 pcs. Class 1 identification label: 1 pc.