AUTOMATION
CONTROLS

Search
Discontinued
Products



Automation Controls Datasheet

MLDET2110P | MINAS E Series Servo Driver

 

Email the information about MLDET2110P | MINAS E Series Servo Driver to whom you indicate.

Send to (email address):

To send multiple email addresses, separate them by using “Enter” key.

Sender (email address):

Message (optional):

300 character limit.

Your email has been sent.


MINAS E Series Servo Driver

*Photo may vary from actual product.

  • RoHS Compliant

Part Number MLDET2110P
Product Servo Driver
Details Ultra compact position control type
without the safety function
Product name MINAS E Series Servo Driver
Features Position control type, 50 W to 400 W, Input power supply for Driver: Voltage AC 100 V/200 V, 2500 p/r incremental encoder, Frequency response 400 Hz

As of August 03, 2021
Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Item Specifications
Part Number MLDET2110P
Details Ultra compact position control type
without the safety function
Family Name MINAS E
Series E series
Type Ultra compact position control type
Frame L-Frame
Frequency response 400 Hz
Control method Position control
Safety Function without
Power device Max. current rating 15A
Current detector current rating 10A
Supply voltage Single phase 100 V
I/F Classification of type Pulse train only
Dimensions (W) (Unit: mm) 40
Dimensions (H) (Unit: mm) 140
Dimensions (D) (Unit: mm) 105
Mass (kg) 0.40
Environment For more details, please refer to the instruction manual.

Basic Specifications

Item Specifications
Input power Single phase 100 to 115 V +10% -15% 50/60 Hz
Encoder feedback 2500 P/r (10000 resolution) incremental encoder
Parallel I/O connector:
Control signal Input
7 inputs (1) Servo-ON, (2) Alarm clear and other inputs vary depending on the control mode.
Parallel I/O connector:
Control signal Output
4 outputs
(1) Servo alarm, (2) Alarm, (3) Release signal of external brake and other outputs vary depending on the control mode.
Parallel I/O connector:
Pulse signal Input
2 inputs Supports both line driver I/F and open collector I/F.
Parallel I/O connector:
Pulse signal Output
4 outputs
Feed out the encoder pulse (A, B and Z-phase) in line driver. Z-phase pulse is also feed out in open collector.
Communication function RS232
Communication function: RS232 1: 1 communication to a host with RS232 interface is enabled.
Regeneration No built-in regenerative resistor (external resistor only)
Control mode The following 3 modes are selectable with parameter
(1) High-speed position control, (2) Internal velocity control, (3) High-functionality position control

Return to top

As of August 03, 2021
Specifications and design of the products are subject to change without notice for the product improvement.

[Unit:mm]

Dimensions



Return to top

As of August 03, 2021
Specifications and design of the products are subject to change without notice for the product improvement.

Pin disposition



Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE SEARCH FAQ

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE

FAQ

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)


Before Purchasing and Using the Products (Motors for FA & Industrial Application)

Specifications and design of the products displayed on this website are subject to change without notice for the product improvement. (including specification change, manufacturing location change, End Of Sales, End Of Life). Therefore, be sure to request and confirm in advance the most current specifications, which explain the specifications in detail, before the final stage of your design, purchasing or use for any application.

Safety Precautions

• Important Notes on exporting this product or equipment containing this product;
If the end-user or application of this product is related to military affairs or weapons, its export may be controlled by “Foreign Exchange and Foreign Trade Control Law” of Japan where export license will be required before product can be exported from Japan.

• This product is designed and manufactured for use in General Purpose Industrial Equipment and it is not intended to be used in equipment or system that may cause personal injury or death.

• All servicing such as installation, wiring, operation, maintenance and etc., should be performed by qualified personnel only.

• Tighten mounting screws with an adequate torque by taking into consideration strength of the screws and the characteristics of material to which the product will be mounted. Over tightening can damage the screw and/or material; under tightening can result in loosening.
*Example: apply 2.7 N·m – 3.3 N·m torque when tightening steel screw (M5) to steel surface.

• Install safety equipment to prevent serious accidents or loss that is expected in case of failure of this product.

• Consult us before using this product under such special conditions and environments as nuclear energy control, aerospace, transportation, medical equipment, various safety equipments or equipments which require a lesser air contamination.

• We have been making the best effort to ensure the highest quality of our products, however, some applications with exceptionally large external noise disturbance and static electricity, or failure in input power, wiring and components may result in unexpected action. It is highly recommended that you make a fail-safe design and secure the safety in the operative range.

• If the motor shaft is not electrically grounded, it may cause an electrolytic corrosion to the bearing, depending on the condition of the machine and its mounting environment, and may result in the bearing noise. Checking and verification by customer is required.

• Failure of this product depending on its content may generate smoke of about one cigarette. Take this into consideration when the application of the machine is clean room related.

• Please be careful when using the product in an environment with high concentrations of sulfur or sulfuric gases, as sulfuration can lead to disconnection from the chip resistor or a poor contact connection.

• Do not input a supply voltage which significantly exceeds the rated range to the power supply of this product. Failure to heed this caution may lead to damage of the internal parts, causing smoke and/or fire and other troubles.

• The user is responsible for matching between machine and components in terms of configuration, dimensions, life expectancy, characteristics, when installing the machine or changing specification of the machine. The user is also responsible for complying with applicable laws and regulations.

• Manufacturer’s warranty will be invalid if the product has been used outside its stated specifications.

• Component parts are subject to minor change to improve performance.

• Read and observe the instruction manual to ensure correct use of the product.

Warranty period

The warranty period is one year from the date of purchase or 18 months from the month of manufacture in our plant.

  

Warranty information

•Should any defect develop during warranty period under standard service conditions as described in the manual, the company agrees to make repairs free of charge.
Even during warranty period, the company makes fee-based repair on product containing:


[1] Failure or damage due to misuse, improper repair or alteration.
[2] Failure or damage due to falling, or damage during transportation, after the original delivery
[3] Defects resulting from neglect of the specification in use of the product.
[4] Failure or damage due to unregulated voltage and fire, and act of natural disasters such as earthquake, lightning, wind, flood and salt pollution.
[5] Defects resulting from invasion of foreign materials such as water, oil and metal pieces. Parts exceeding their standard lifetime specified in this document are excluded.
  

•The company shall not be liable for any indirect, incidental or consequential damage or loss of any nature that may arise in connection with the product

 
MLDET2110P | MINAS E Series Servo Driver