Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Micro Photoelectric Sensors > Amplifier Built-in / U-shaped Micro Photoelectric Sensor [Ultra-small / Cable type] PM-25 > Part Number > PM-L25-C3

PM-L25-C3 | Amplifier Built-in / U-shaped Micro Photoelectric Sensor [Ultra-small / Cable type] PM-25

CAD data　 Catalogs　 Manuals　 Software
FAQ

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Dimensions
Accessories (Option)

Product Number	PM-L25-C3
Part Number	PM-L25-C3
Product	Amplifier Built-in / U-shaped Micro Photoelectric Sensor
Details	Ultra-small / Cable type [L type]
Product name	Amplifier Built-in / U-shaped Micro Photoelectric Sensor [Ultra-small / Cable type] PM-25

As of April 16, 2024
Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Item	Specifications
Product Number	PM-L25-C3
Part Number	PM-L25-C3
Applicable regulations and certifications	CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), ISO 13849-1 (Category 1, PLc) (Note), UL/c-UL certification (Note) : Conformed from December 2021 production.
Sensing range	6 mm 0.236 in (fixed)
Minimum sensing object	0.8 × 1.2 mm 0.031 × 0.047 in opaque object
Hysteresis	0.05 mm 0.002 in or less
Repeatability	0.01 mm 0.0004 in or less
Supply voltage	5 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption	15 mA or less
Output	NPN open-collector transistor ・Maximum sink current: 50 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current)
Output:Output operation	Incorporated with 2 outputs: Light-ON / Dark-ON
Output:Short-circuit protection	Incorporated
Response time	Under light received condition: 20 μs or less Under light interrupted condition: 80 μs or less (Maximum response frequency: 3 kHz)(Note) (Note) : Refer to the note on the specification page for the response frequency.
Operation indicator	Orange LED (lights up under light received condition)
Pollution degree	3
Protection	IP64 (IEC)
Ambient temperature	-25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +80 ℃ -22 to +176 ℉ (Note) : In case is used at an ambient temperature of +50 ℃ +122 ℉, or more, make sure to mount it on a metal body.
Ambient humidity	5 to 85 % RH, Storage: 5 to 95 % RH
Ambient illuminance	Fluorescent light: 1,000 ℓx at the light-receiving face
Voltage withstandability	1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance	20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance	10 to 2,000 Hz frequency, 1.5 mm 0.059 in double amplitude (maximum acceleration 196 m/s²) in X, Y and Z directions for two hours each
Shock resistance	15,000 m/s² acceleration (1,500 G approx.) in X, Y and Z directions three times each
Emitting element	Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, non-modulated)
Material	Enclosure: PBT Display section: Polycarbonate
Cable	0.09-mm² 4-core cabtyre cable, PVC, 3 m 9.843 ft long
Wiring length	Extension up to total 100 m 328.084 ft is possible with 0.3 mm², or more, cable. (Note 1) : If the cable is extended to 20 m 65.617 ft or longer, confirm that the supply voltage at the end of the cable attached to the sensor is 4.5 V or higher. (Note 2) : For safety applications, do not exceed 30 m 98.425 ft.
Weight	Net weight: 30 g approx Gross weight: 35 g approx.
Remark	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.