AUTOMATION
CONTROLS

Search
Discontinued
Products



SF4B-H36-03(V2) | Safety Light Curtain Type 4 Korean Press Machine Compliant SF4B-03 Ver.2


Safety Light Curtain Type 4 Korean Press Machine Compliant SF4B-03 Ver.2

*Photo may vary from actual product.

  • RoHS Compliant This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.  


  • To Be Discontinued
  • Last time buySeptember 30, 2022
Product Number SF4B-H36-03(V2)
Part Number SF4B-H36-03(V2)
Product Safety Light Curtain Type 4 Korean Press Machine Compliant
Details Min. sensing object dia. 25 mm dia. 0.984 in type (20 mm 0.787 in beam pitch)
Product name Safety Light Curtain Type 4 Korean Press Machine Compliant SF4B-03 Ver.2
  • Substitute -
  • Sub Prod No. -
  • Sub Part No. -
  • Remark Sorry, no suggested alternative products.

As of September 29, 2022
Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Item Specifications
Product Number SF4B-H36-03(V2)
Part Number SF4B-H36-03(V2)
CE marking directive compliance Machinery Directive, EMC Directive, RoHS Directive
No. of beam channels 36
Protective height 710 mm 27.953 in
Current consumption Emitter: 80 mA or less
Receiver: 115 mA or less
PFHD 3.0x10-9
MTTFD 100 years or more
Weight(Total of emitter and receiver) 1,420 g approx.
Applicable standards:International standard IEC 61496-1/2 (Type 4), ISO 13849-1 (Category 4, PLe), IEC 61508-1 to 7 (SIL3)
(Note) PLe SIL3 compliant from production in August 2009.
Applicable standards:Japan JIS B 9704-1/2 (Type 4), JIS B 9705-1 (Category 4), JIS C 0508-1 to 7 (SIL3)
(Note) PLe SIL3 compliant from production in August 2009.
Applicable standards:Europe EN 61496-1 (Type 4), EN ISO 13849-1 (Category 4, PLe),EN 61508-1 to 7 (SIL3), EN 55011, EN 50178, EN 61000-6-2
(Note) PLe SIL3 compliant from production in August 2009.
Applicable standards:North America ANSI/UL 61496-1/2 (Type 4), ANSI/UL 508, UL 1998 (Class 2), CAN/CSA 61496-1/2 (Type 4), CAN/CSA C22.2 No.14, OSHA 1910.212, OSHA 1910.217(C), ANSI B11.1 to B11.19, ANSI/RIA 15.06
(Note) PLe SIL3 compliant from production in August 2009.
Operating range 0.3 to 9 m 0.984 to 29.528 ft
(Note) The operating range is the possible setting distance between the emitter and the receiver.
Min. sensing object dia. 25 mm dia. 0.984 in opaque object
(Note) When the floating blanking function is used, the size of the min. sensing object is changed.
Effective aperture angle plus or minus 2.5degrees or less [for an operating range exceeding 3 m 9.843 ft (conforming to IEC 61496-2 / UL 61496-2)]
Power voltage 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Control outputs (OSSD 1, OSSD 2) PNP open-collector transistor / NPN open-collector transistor (switching method)
- When selecting PNP output: Max. source current 200 mA
- When selecting NPN output: Max. sink current 200 mA
- Applied voltage: same as supply voltage (When selecting PNP output: between the control output and +V, When selecting NPN output: between the control output and 0 V)
- Residual voltage: 2.5V or less (When selecting PNP output: source current 200 mA, when selecting NPN output: sink current 200 mA)(when using 20 m 65.617 ft length cable)
Control outputs (OSSD 1, OSSD 2):Operation mode ON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the Safety Light Curtain or the synchronization signal)
(Note) The outputs are not "OFF" when muting function is active even if the beam channel is interruped.
(Note) In case the blanking function is valid, the operation mode is changed.
Control outputs(OSSD1, OSSD2):Protection circuit Incorporated
Response time OFF response: 14 ms or less
ON response: 80 to 90 ms
Auxiliary output (Non-safety output) PNP open-collector transistor / NPN open-collector transistor (switching method)
- When selecting PNP output: Max. source current 60 mA
- When selecting NPN output: Max. sink current 60 mA
- Applied voltage: same as supply voltage (When selecting PNP output: between the auxiliary output and +V, When selecting NPN output: between the auxiliary output and 0 V)
- Residual voltage: 2.5V or less (When selecting PNP output: source current 60 mA, when selecting NPN output: sink current 60 mA)(when using 20 m 65.617 ft length cable)
Auxiliary output (Non-safety output):Operation mode OFF when control outputs are ON, ON when control outputs are OFF.
Auxiliary output (Non-safety output):Protection circuit Incorporated
Auxiliary output (Non-safety output):Responce time OFF replay: 34 ms or less, ON replay 110 ms or less
Interference prevention function Incorporated(Available only when in series connection for SF4B-□-03)
(Note) Please use 12-core cable.
Emission halt function Incorporated
Interlock function Incorporated [Manual reset / Auto reset (Note)]
(Note) The manual reset and auto reset are possible to be switched depending on the wiring status.
External device monitoring function Incorporated
Environmental resistance:Degree of protection IP67 / IP65 (IEC)
Environmental resistance:Ambient temperature -10 to +55 degrees +14 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -25 to +70 degrees -13 to +158 degrees Fahrenheit
Environmental resistance:Ambient humidity 30 to 85 % RH, Storage: 30 to 95 % RH
Ambient illuminance Incandescent light: 3,500 lx or less at the light-receiving face
Environmental resistance:Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Environmental resistance:Insulation resistance 20 MOhm , or more, with 500 V DC megger between all supply terminals connected together and enclosure
Environmental resistance:Vibration resistance 10 to 55 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each
Environmental resistance:Shock resistance 300 m/s2 acceleration (30 G approx.) in X, Y and Z directions for three times each
Emitting element Infrared LED (Peak emission wavelength: 870 nm 0.034 mil)
Material Enclosure: Aluminium
Upper and lower edges: Iron,
Sensing surface: Polycarbonate / Polyester resin
Cap: PBT
Connecting method Connector
Cable length Total length up to 50 m 164.042 ft is possible for both emitter and receiver, with optional mating cables
(Note) The cable can be extended within 30 m 98.425 ft (for emitter / receiver) when two light curtains are connected in series, within 20 m 65.617 ft when three light curtains are connected in series. Furthermore, when the muting lamp is used, the cable can be extended within 40 m 131.234 ft (for emitter / receiver).
Accessories SF4B-TR25 (Test rod): 1 No

Return to top

Accessories (Option)

To Be Discontinued

no_image
Product Number FC-SFBH-36
Part Number FC-SFBH-36
Product name Front protection cover

To Be Discontinued

no_image
Product Number MC-SFBH-36
Part Number MC-SFBH-36
Product name Protection bar set

To Be Discontinued

no_image
Product Number MC-SFBH-36-T
Part Number MC-SFBH-36-T
Product name Protection bar set


More



Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE SEARCH FAQ

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE

FAQ

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)