AUTOMATION
CONTROLS

Search
Discontinued
Products



NewSG-P1020-M-P | Non-Contact Safety Door Switch SG-P


Non-Contact Safety Door Switch SG-P

*Photo may vary from actual product.

  • RoHS Compliant This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.  


Product Number SG-P1020-M-P
Part Number SG-P1020-M-P
Product Non-Contact Safety Door Switch
Details Visible type
(Low code / Standard)
Product name Non-Contact Safety Door Switch SG-P

As of May 24, 2022
Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Item Specifications
Product Number SG-P1020-M-P
Part Number SG-P1020-M-P
Applicable standards:International standard ISO 13849-1 (Category 4, PLe), IEC 61508-1 to 7 (SIL3), IEC 62061 (SIL3), IEC 60947-5-3, ISO 14119
Applicable standards:Japan JIS B 9705-1, JIS C 0508 1 to 7, JIS B 9961, JIS C 8201-5-2, JIS B 9710
Applicable standards:Europe (EU) EN ISO 13849-1 (Category 4, PLe), EN ISO 14119, EN 60947-5-3, EN 300 330, EN IEC 63000, EN 301 489-1
Applicable standards:North America CAN/CSA C22.2 No.14, UL508
Applicable standards and certifications CE Marking (Machinery Directive, RE Directive, RoHS Directive), TÜV SÜD certification, TÜV SÜD NRTL certification (U.S.A., Canada), the U.S.'s radio regulations (FCC), Canada's radio regulations (ICES-003, RSS-310), Singapore's radio regulations (IMDA)
Operating distance : Front / Side Sao (OFF→ON): 5 mm 0.197 in, Sar (ON → OFF): 15 mm 0.591 in
Power voltage 24V DC+10-20% Ripple P-P 10 % or less
Current consumption 30 mA or less
Control outputs (OSSD 1, OSSD 2) PNP open-collector transistor 2 outputs
• Maximum source current: 100 mA
• Applied voltage: Same as the power supply voltage (PNP output: between control output and 0 V)
• Residual voltage: 2 V or less (source current and sink current: 100 mA) (excluding voltage drop due to cable)
• Leakage current: 0.2 mA or less (including power OFF state)
• Maximum load capacity: 0.47 μF
• Load wiring resistance: 3 Ω or less
Control outputs (OSSD 1, OSSD 2):Operation mode • When the actuator is detected (safe state): ON
• When the actuator is not detected (unsafe state or lockout state): OFF
• When the switch body (sub) does not detect actuator (series connection): OFF
Control output(OSSD):Protection circuit Incorporated
Response time • For single unit: ON→OFF 100 ms or less, OFF→ON 100 ms or less
• For multiple units: Time for single unit + 5 ms x (number of connected units - 1)
Check input and output Dedicated communication line between the switch body (standard) and the switch body (sub) (Note)
* It is not for external input and output. (voltage range 0 V to 5 V DC)
(Note) : When using the device as a single unit, connect the check input with the check output.
Number of units connected in series 30 units or less (standard 1 unit, sub 29 units)
Pollution degree 3
Environmental resistance:Degree of protection IP65(IEC)
Environmental resistance:Ambient temperature -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +65 ℃ -13 to +149 ℉
Environmental resistance:Ambient humidity 30 to 85 % RH, storage: 30 to 95 % RH
Environmental resistance:Voltage withstandability 1,000 V AC for one minute between all supply terminals connected together and enclosure
Environmental resistance:Insulation resistance 20 MΩ or more, with 500 V DC megger between all supply terminals connected together and enclosure
Environmental resistance:Vibration resistance 10 to 55Hz, 1 mm double amplitude, 2 hours each in X, Y, and Z directions
Environmental resistance:Shock resistance 300 m/s2 (approx. 30 G), 3 times each in X, Y, and Z direction
Material Switch body: PBT, PC, SUS (stainless steel), EPDM
Actuator: PBT, PC
Cable 6–core cabtyre cable, 5 m 16.404 ft long
Connected cable length • When using only one unit: Maximum cable length of 20 m 65.617 ft between switch body and power supply unit
• When connecting multiple units in series: Maximum total cable length of 100 m 328.084 ft, maximum cable length of 20 m 65.617 ft between two adjacent units
Weight Switch body (standard): 180 g approx., Actuator : 20 g approx.
Gross weight 270 g approx.
Remark Where measurement conditions have not been specified precisely, the conditions used were ambient temperature +23 ℃ +73 ℉.

■Transponder specifications
Operating frequency: 125 kHz
Max. transmitter output: 3.33 μW

Return to top

Accessories (Option)

no_image
Product Number NEW SG-PK-M1
Part Number SG-PK-M1
Product name Maintenance actuator
no_image
Product Number NEW SG-PK-M2
Part Number SG-PK-M2
Product name Maintenance actuator

Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE SEARCH FAQ

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE

FAQ

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)