Optical Touch Switch SW-100

Specifications

Designation Optical touch switch
  With safeguard
Model No. SW-101 SW-111
Sensing method Thru-beam type photoelectric sensor (2 beam axes)
Applicable standards CSA 22.2 No.14, CSA 22.2 No.0.8, ANSI / NFPA 79, UL 508, EN 60947-5-2 (EMC only)
CE marking directive compliance EMC Directive, RoHS Directive
Power supply 12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption 100 mA or less (excluding external connection load)
Outputs Semiconductor Photo-MOS relay output x 3
• Maximum load current: 100 mA
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 1.5 V or less (at 100 mA of load current)
  Output
operation
Output 1 : When an object is detected (beam is interrupted): OFF / When an object is not detected (beam is received): ON
Output 2, 3 : When an object is detected (beam is interrupted): ON / When an object is not detected (beam is received): OFF
Short-circuit protection Incorporated
Response time 100 ms or less when an object is detected, 50 ms or less when an object is not detected
Time-out function Switchable either effective or ineffective by short-circuiting terminals (disabled when short-circuited)
External input 0 to 1 V or 10 V to +V: Valid (External input indicator lights up), 4 to 6 V or Open: Invalid (External input indicator lights off)
Indicators Power indicator
(POWER)
Green LED (lights up when the power is ON)
Operation indicator
(OPE.)
Green LED (lights up when an object is detected)
External input
indicator 1
Green LED (lights up when external input 1 is valid)
External input
indicator 2
Orange LED (lights up when external input 2 is valid)
Fault indicator
(FAULT)
Yellow LED (blinks or lights up when fault occurs)
Protection IP65 (IEC), TYPE 1 (UL 50) (excluding terminal part)
Ambient temperature −25 to +50 ℃ −13 to +122 (No dew condensation or icing allowed),
Storage: −30 to +70 ℃ −22 to +158
Ambient humidity 30 to 85 % RH, Storage: 30 to 85 % RH
Ambient illuminance Incandescent light: 3,000 Lx or less at the light-receiving face
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 20 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude in X, Y and Z directions for two hours each 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Removable-type
terminals
Connector 3.5 mm 0.138 in pitch, 2-level socket: 12 pins
Terminal part 3.5 mm 0.138 in pitch spring-cage terminals: 6 pins x 2 (FMC1,5/6-ST-3,5GS manufactured by Phoenix Contact)
Cable 0.2 to 1.5 mm2 [including single wire or ferrule (sleeve)]
Maximum cable length Up to 20 m 65.617 ft (for cable from 0.2 to 0.3 mm2), Up to 100 m 328.084 ft (for cable from 0.3 to 1.5 mm2)
Material Enclosure: Polycarbonate, Polyester, O-ring: Silicone rubber, Mounting nut: PBT, Mounting packing: Silicone rubber
Weight Net weight: 130 g approx., Gross weight: 200 g approx. Net weight: 150 g approx., Gross weight: 220 g approx.

Note:
Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 .

Return to top

Return to top