MINAS E Series


1. Standard Wiring Example of Main Circuit/ Driver Specifications Encorder Wiring Diagram

Standard Wiring Example of Main Circuit

 

 


When you make your own junction cable for encoder
1) Refer the wiring diagram.
2) Use the twisted pair wire with shield, with core diameter of 0.18 mm2 (AWG24) or larger, with higher bending resistance.
3) Use the twisted pair wire for the corresponding signal and power supply.
4) Shielding
Connect the shield of the driver to the case of CN X4.
Connect the shield of the motor to Pin-6.




 

Return to top

2. Control Circuit Standard Wiring Example

 

Fig. 1

Fig. 1
This fig. shows the usage of an external control signal power supply.
You need to install an resistor R for current limit corresponding to VDC.

 

 

Return to top

Return to top