{lead}
{name}
  • {name}
  • 日本語
  • English (Global)
  • English (Asia Pacific)
  • 简体中文
  • 繁體中文
  • 한국어
▼
Panasonic Industry ／ 制御機器
MENU
Panasonic Industry ／ 制御機器

HG-TC111｜對照式數位位移感測器 HG-T

下載

※ 實際商品可能與照片不同。

適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質

品名

HG-TC111

型號

HG-TC111

產品

Controller

詳細

Slave unit / High performance type

商品名稱

 對照式數位位移感測器 HG-T

聯繫我們

scroll
※為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。

詳細規格

為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。
項目內容
品名HG-TC111
型號HG-TC111
產品名Controller
Applicable regulationsCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
汚損度2
使用標高2,000 m 6561.68 ft or less
(Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.
Environmental resistance : ProtectionIP40(IEC)
耐環境性 : 使用環境溫度-10 to +50 ℃ +14 to +122 ℉ (No dew condensation or icing allowed) (Note), Storage: -20 to +60 ℃ -4 to +140 ℉
(Note) : When slave units are connected to the master unit, the maximum sink current / source current of control output and ambient temperature vary depending on the number of connected slave units as shown below.
Number of connected slave units Maximum sink current and source
current of control output		 Ambient temperature
  When communication unit
is connected
1 to 7 units 1 to 6 units 20 mA -10～+45℃
+14 to +113 ℉
8 to 15 units 7 to 14 units 10 mA
scroll
耐環境性 : 使用環境濕度35 to 85 % RH, Storage: 35 to 85 % RH
耐環境性 : 耐電壓1,000 V AC for one minute between all supply terminals connected together and enclosure
耐環境性 : 絕緣電阻20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
耐環境性 : 耐振動10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 to 58 Hz), Maximum acceleration 49 m/s2 (58 to 150 Hz) in X, Y and Z directions for two hours each
耐環境性 : 耐衝撃98m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each
材質Case: Polycarbonate, Cover: Polycarbonate, Switches: Polyacetal
Cable0.15 mm2 7-core composite cable, 2 m 6.562 ft long
Net weight140 g approx.
Applicable sensor headHG-T1010、HG-T1110
Maximum number of connectable controllersUp to 15 slave units can be connected to a master unit.
(Note) : When connected to a communication unit for digital displacement sensor, up to 14 slave units can be connected per master unit.
電源電壓24 V DC ±10 %, including ripple 0.5 V (P-P)
消耗電流100 mA or less (when sensor head is connected)
(Note) : Current consumption does not include analog current output.
Analogue output : Analog voltage output•Voltage output range: 1 to 5 V/F.S. (default value)
•Linearity: ±0.05 % F.S.
•Output when alarm occurs: 5.2 V
•Output impedance: 100 Ω max.
(Note) : Linearity is a value calculated from digitally measured values at F.S. = 16 mA for current output or F.S. = 4 V for voltage output.
Analogue output : Analog current output•Current output range: 4 to 20 mA/F.S. (default value)
•Linearity: ±0.25 % F.S.
•Output when alarm occurs: 0 mA
•Load impedance: 250 Ω max.
(Note) : Linearity is a value calculated from digitally measured values at F.S. = 16 mA for current output or F.S. = 4 V for voltage output.
Control output(Output 1, Output 2, Output 3)NPN open-collector transistor
•Maximum sink current: 50 mA (Note)
•Applied voltage: 30 V DC or less (between output and 0 V)
•Residual voltage: 1.5 V or less (at 50 mA sink current)
•Leakage current: 0.1 mA or less


PNP open-collector transistor
•Maximum source current: 50 mA (Note)
•Applied voltage: 30 V DC or less (between output and +V)
•Residual voltage: 1.5 V or less (at 50 mA source current)
•Leakage current: 0.1 mA or less

(Note) : When slave units are connected to the master unit, the maximum sink current / source current of control output and ambient temperature vary depending on the number of connected slave units as shown below.
Number of connected slave units Maximum sink current and source
current of control output		 Ambient temperature
  When communication unit
is connected
1 to 7 units 1 to 6 units 20 mA -10～+45℃
+14 to +113 ℉
8 to 15 units 7 to 14 units 10 mA
scroll
Control output(Output 1, Output 2, Output 3) : Short-circuit protectionIncorporated (automatic reset type)
Control output(Output 1, Output 2, Output 3) : Judgment outputN.O. / N.C. switching type
Control output(Output 1, Output 2, Output 3) : Alarm outputOpen when alarm occurs
External output switchingOutput 1, Output 2, and Output 3 can be switched to 3-value, 2-value, Logic, and Logic 2.
External input(Input 1, Input 2, Input 3)
Non-contact input or NPN open-collector transistor
•Input conditions
Invalid: +8 V to +V DC or open, Valid: 0 to +1.2 V DC
•Input impedance: 10 kΩ approx.


Non-contact input or PNP open-collector transistor
•Input conditions
Invalid: 0 to +0.6 V DC or open, Valid: +4 V to +V DC
•Input impedance: 10 kΩ approx.
External input(Input 1, Input 2, Input 3) : Input time• Trigger input: 2 ms or more (ON)
• Laser emission stop input, preset input, reset input, bank input A/B(Note): 20 ms or more (ON)
(Note) : Average count (response time) is for when the sampling cycle is set to 1 ms (standard sampling). Response times differ when the sampling cycle is set to 0.5 ms (high-speed sampling).
External input switchingInput 1, Input 2, and Input 3 can be switched to "Preset / Reset / Trigger", "Bank Input A / Bank Input B / Select (Preset, Reset, Trigger)", or "Laser emission stop".
取樣週期1 ms (standard sampling) / 0.5 ms (high-speed sampling)
Average count (response time)1 time (2 ms), 2 times (3 ms), 4 times (5 ms), 8 times (9 ms), 16 times (17 ms), 32 times (33 ms), 64 times (65 ms), 128 times (129 ms), 256 times (257 ms), 512 times (513 ms), and 1,024 times (1,025 ms) switching type
(Note) : Average count (response time) is for when the sampling cycle is set to 1 ms (standard sampling). Response times differ when the sampling cycle is set to 0.5 ms (high-speed sampling).
Display resolution1 μm 0.039 mil
Display range-199.999 to 199.999 mm -7.874 to 7.874 in
scroll

組合商品（選項）

產品號型號商品詳細商品名稱

組合商品

MENU

最近搜尋過的產品

最近搜尋過的產品型號