HL-D3C | 高速多點雷射位移感測器 HL-D3(停產品)

詳細規格 2021年9月30日的資訊

項目	內容
品名	HL-D3C
型號	HL-D3C
Applicable sensor heads	HL-D301B, HL-D301C
Connectable sensor heads	Number of connectable units: Max. 2 units
Supply voltage	24 V DC ±10 % including ripple 0.5 V (P-P)
Current consumption	1 A or less (when 2 sensor heads are connected)
Sampling rate	Depends on the sensing mode and settings Multi-zone beam control mode : Standard 12.2 ms (Note 1) Whole synchronized measurement mode : Max. 2.5 ms (Note 2) Multi-select displacement sensing mode : Max. 80 μs (Note 3) (Note 1):Value for using two judgment outputs with 1 sensor head in MZBC mode, with each measuring range set to Max. and light intensity not adjusted (continuous sensing). (Note 2):Value for obtaining displacement shape waveform data using buffering and 2 sensor heads in whole synchronized measurement mode, with each measuring range set to Min. (no OUT calculation). (Note 3):Value for using 2 judgment outputs with 1 sensor head in MSDS mode, with the unit light receiving time set to 40 μs, light intensity not adjusted (continuous), and 2 points selected (without wide cell function).
Judgment output	N-channel FET, open drain • Maximum sink current: 100 mA • Applied voltage: 30 V DC or less (between output terminal and 0 V) • ON-resistance: 5 Ω or less
Judgment output : Output operation	Open during output operation (switchable)
Judgment output : Short-circuit protection	Incorporated
Alarm output	N-channel FET, open drain • Maximum sink current: 100 mA • Applied voltage: 30 V DC or less (between output terminal and 0 V) • ON-resistance: 5 Ω or less
Alarm output : Output operation	Open when alarm is triggered (switchable)
Alarm output : Short-circuit protection	Incorporated
External trigger input	Photocoupler insulation input
External trigger input : Input operation	ON: short-circuiting to external insulation COM (-) , OFF: when open
External trigger input : Applied voltage	30 V DC or less (leakage current: 0.1 mA or less)
Laser control input	Photocoupler insulation input
Laser control input : Input operation	Laser emission: short-circuiting to external insulation COM (-) , Laser emission OFF: when open
Laser control input : Applied voltage	30 V DC or less (leakage current: 0.1 mA or less)
Zero set input	Photocoupler insulation input
Zero set input : Input operation	ON: short-circuiting to external insulation COM (-) , OFF: when open
Zero set input : Applied voltage	30 V DC or less (leakage current: 0.1 mA or less)
Timing input	Photocoupler insulation input
Timing input : Input operation	ON: short-circuiting to external insulation COM (-) , OFF: when open
Timing input : Applied voltage	30 V DC or less (leakage current: 0.1 mA or less)
Reset input	Photocoupler insulation input
Reset input : Input operation	ON: short-circuiting to external insulation COM (-) , OFF: when open
Reset input : Applied voltage	30 V DC or less (leakage current: 0.1 mA or less)
RS-232C interface	Baud rate: 9,600, 19,200, 38,400, 57,600, 115,200 bit/s(Note):Products produced from September 2013 (Ver. 2) are also compatible with 9,600, 19,200 and 38,400 bit/s.
USB interface	USB 2.0 full-speed (USB 1.1 compatible)
Settings / Data display	HL-D3SMI (accessory) or dedicated API
Indicator : Power	Green LED (lights up at power on)
Indicator : Sensor head A Laser radiation	Green LED [During continuous sensing: lights up during laser emission, blinks twice when turning off During sensing stop process: alternately lights up during laser emission (ON: 1 sec / OFF: 1 sec), blinks once when turning off]
Indicator : Sensor head B Laser radiation	Green LED [During continuous sensing: lights up during laser emission, blinks twice when turning off During sensing stop process: alternately lights up during laser emission (ON: 1 sec / OFF: 1 sec), blinks once when turning off]
Indicator : Alarm	Red LED (lights up when there is a sensing alarm or sensor head wire breakage)
Environmental resistance : Ambient temperature	0 to +50 ℃ +32 to +122 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉
Environmental resistance : Ambient humidity	35 to 85 % RH , Storage: 35 to 85 % RH
Environmental resistance : Vibration resistance	10 to 55 Hz frequency (period: 1 min) , 0.75 mm 0.030 in double amplitude in X, Y, and Z directions for 30 min. each
Environmental resistance : Shock resistance	196 m/s2 acceleration (20G approx.) in X, Y, and Z directions three times each
Material	Enclosure: Aluminum
Weight	300 g approx.
Accessory	HL-D3 set-up CD-ROM, (including HL-D3SMI and User's Manual), Instruction manual, USB cable (2 m 6.562 ft)

回到頁首