Business > Industrial Devices > Automation Controls Top > Components & Devices > Relays / Couplers > Interface Terminal > RT-3 UNIT RELAY (PhotoMOS Power type) /4-POINT TERMINAL (Without relay type) > Part Number
Contact arrangement | Type | Rated Input voltage | Type No. | Part No. | Standard packing | |
---|---|---|---|---|---|---|
Inner carton | Outer carton | |||||
1 Form A x 4 | DC only (Equipped with AQZ102) |
12 V DC | RT3SP1-12V | AY34001 | 1 pc. | 20 pcs. |
24 V DC | RT3SP1-24V | AY34002 | ||||
AC/DC dual use (Equipped with AQZ204) |
12 V DC | RT3SP2-12V | AY35001 | |||
24 V DC | RT3SP2-24V | AY35002 |
Notes) | 1: | 4 pieces PhotoMOS Power types are installed. Cannot be equipped with PA-N relays. |
---|---|---|
2: | For other contact arrangement, please contact our sales representative. |
Type | Rated Input voltage | Type No. | Part No. | Standard packing | |
---|---|---|---|---|---|
Inner carton | Outer carton | ||||
Without relay type | 12 V DC | RT3BB-12V | AY30001 | 1 pc. | 20 pcs. |
24 V DC | RT3BB-24V | AY30002 |
Note) | Relay sold separately. Please refer to the following for the relays that can be mounted. |
---|
(per relay, at 25°C, initial)
Mountable relays | Output | ||||
---|---|---|---|---|---|
Type | Part No. | Max. load voltage | Recommended load voltage | Continuous load current | Peak load current |
PhotoMOS Power type (DC only) |
AQZ102 | 60 V DC | 0 to 30 V DC | 2.00 A | 9.0 A |
AQZ105 | 100 V DC | 0 to 50 V DC | 1.50 A | 6.0 A | |
AQZ107 | 200 V DC | 0 to 100 V DC | 0.70 A | 3.0 A | |
AQZ104 | 400 V DC | 0 to 200 V DC | 0.40 A | 1.5 A | |
PhotoMOS Power type (AC/DC dual use) |
AQZ202 | 60 V (peak) | 0 to 12 V AC / 0 to 30 V DC | 1.80 A | 9.0 A |
AQZ205 | 100 V (peak) | 0 to 24 V AC / 0 to 50 V DC | 1.20 A | 6.0 A | |
AQZ207 | 200 V (peak) | 0 to 48 V AC / 0 to 100 V DC | 0.60 A | 3.0 A | |
AQZ204 | 400 V (peak) | 0 to 125 V AC / 0 to 200 V DC | 0.30 A | 1.5 A | |
AQZ404 (1 Form B type) | 400 V (peak) | 0 to 125 V AC / 0 to 200 V DC | 0.30 A | 1.5 A |
Notes: | 1. | Peak load current is limited to “100 ms, 1 shot”. |
---|---|---|
2. | During 4-point simultaneous operation, the rating per point is also as shown in the table above. | |
3. | Please use a load current that is within the range of the data given below in “REFERENCE DATA Load current vs. ambient temperature characteristics”. | |
4. | Be very careful regarding the polarity on the output side when equipped with AQZ10* (dedicated PhotoMOS power voltage sensitive DC type). | |
5. | Never install relays into this product other than those given above. Doing so will cause malfunction, breakdown, and breakdown of the connected product. |
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)