Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Laser Markers / 2D Code Readers > Laser Markers / 2D Code Readers > 2D Code Reader LP-ABR10(Discontinued Products) > Specifications
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
|
Type | Standard type | Long-distance type | ||
---|---|---|---|---|
Model No. | LP-ABR11 | LP-ABR12 | ||
CE marking directive compliance | EMC Directive, RoHS Directive | |||
Image sensor | 1/3 inches CMOS monochrome | |||
Effective pixels | 1,280 × 960 (1.2 million pixels approx.) | |||
Internal illumination source | White LED | |||
Reading angle | PITCH: ±35°, SKEW: ±35°, TILT: 360° | |||
Supply voltage | 24 V DC ±10 % | |||
Power consumption | Command (SYNC) standby: 140 mA approx., During reading operation: 400 mA approx. |
|||
Interface | Ethernet | 10Base-T, 100Base-T, 1000Base-T | ||
RS-232C | 1,200 bps to 115.2 kbps | |||
Digital input | Photo-coupler isolation × 1 (Input resistance: 1 kΩ, OFF voltage: 0 to 0.8 V, ON voltage: 6 to 28 V) |
|||
Digital output | Photo-coupler isolation × 4 (Maximum rating: 30 V DC, 50 mA) | |||
Environmental resistance | Protection | IP65(IEC) | ||
Ambient temperature | 0 to +40 ℃ +32 to +104 ℉, Storage: -20 to +65 ℃ -4 to +149 ℉ | |||
Ambient humidity | 35 to 85 % RH (No dew condensation allowed), Storage: 35 to 85 % RH (No dew condensation allowed) |
|||
Vibration resistance | 10 to 55 Hz amplitude 1.5 mm 0.059 in (total width) in X, Y, Z directions for two hours each | |||
Weight | Net weight: 200 g approx. |
Type | Standard type | Long-distance type |
---|---|---|
Model No. | LP-ABR11 | LP-ABR12 |
Supported symbols (2D) | Data Matrix (ECC200), QR Code | |
Minimum resolution | 0.167 mm 0.007 in | |
Read center distance | 100 mm 3.937 in | 200 mm 7.874 in |
View area (horizontal × vertical) | 54 × 40 mm 2.126 × 1.575 in (at read center distance) |
44 × 33 mm 1.732 × 1.299 in (at read center distance) |
Reading distance (typical) | <Data Matrix (ECC200), QR Code> • For cell size of 0.167 mm 0.007 in : 85 to 125 mm 3.346 to 4.921 in • For cell size of 0.25 mm 0.010 in : 70 to 150 mm 2.756 to 5.906 in |
<Data Matrix (ECC200)> • For cell size of 0.167 mm 0.007 in : 185 to 220 mm 7.283 to 8.661in • For cell size of 0.25 mm 0.010 in : 175 to 230 mm 6.89 to 9.055 in <QR Code> • For cell size of 0.167 mm 0.007 in : 190 to 215 mm 7.48 to 8.465 in • For cell size of 0.25 mm 0.010 in : 180 to 225 mm 7.087 to 8.858 in |
* Cell size of 0.25 mm 0.010 in or larger is recommended (horizontal direction) when the 2D code print quality verification function is used.
Standard type LP-ABR11 |
(Unit: mm in)
|
Long-distance type LP-ABR12 |
(Unit: mm in)
|
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)