AUTOMATION
CONTROLS

Search
Discontinued
Products



Ultra-slim Body Picking Sensor NA1-PK5/NA1-5

Option

Option

Designation Model No. Description
Sensor mounting bracket MS-NA1-1 Four bracket set
Four M4 (length 15 mm 0.591 in) screws with washers, eight nuts, four hooks, four spacers and eight M4 (length 18 mm 0.709 in) screws with washers are attached.
(Spacers are not attached with MS-NA1-1.)
MS-NA2-1
Sensor protection bracket MS-NA3 It protects the sensor body.
Two silver bracket set
Four M4 (length 15 mm 0.591 in) screws with washers, and four nuts are attached.
MS-NA3-BK It protects the sensor body.
Two black bracket set
Four M4 (length 15 mm 0.591 in) screws with washers, and four nuts are attached.
Slit mask OS-NA1-5
[10 pcs. per set]		 The slit mask restrains the amount of beam emitted or received.
(Seal type)
Y-shaped connector SL-WY
[5 pcs. per set]		 This connector is able to combine the cables of receiver and emitter into one.

Sensor mounting bracket

MS-NA1-1

M4 screws with washers, nuts and hooks are attached.

MS-NA2-1

M4 screws with washers, nuts, and, hooks and spacers are attached.

Sensor protection bracket

MS-NA3
MS-NA3-BK
M4 screws with washers, and nuts are attached.

Slit mask

OS-NA1-5
Since the slit mask is of seal type, it can be used by sticking to the detection surface.
Take care that the sensing range will be reduced when the slit mask is used.

Y-shaped connector

SL-WY

Return to top

Option
CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region



Related Information
Service & Support

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)