Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Photoelectric Sensors / Laser Sensors > Cylindrical Photoelectric Sensor CY(Discontinued Products) > Specifications
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
|
Type | Thru-beam | Retrorefl ective | Diffuse refl ective | ||
---|---|---|---|---|---|
With polarizing filters | |||||
Model No. | NPN output | CY-21 | CY-27 | CY-29 | CY-22 |
PNP output | CY-21-PN | CY-27-PN | CY-29-PN | CY-22-PN | |
Sensing range | 12 m 39.370 ft | 3 m 9.843 ft (Note 2) |
1.5 m 4.921 ft (Note 2) |
120 mm 4.724 in (Note 3) | |
Sensing object | ø8 mm ø0.315 in or more opaque object (Completely beam interrupted object) |
ø50 mm ø1.969 in or more opaque or translucent object (Note 2, 4) |
ø50 mm ø1.969 in or more opaque, translucent or specular object (Note 2, 4) |
Opaque, translucent or transparent object (Note 4) |
|
Hysteresis | - | 15 % or less of operation distance (Note 3) |
|||
Repeatability (perpendicular to sensing axis) |
0.1 mm 0.004 in or less | 0.3 mm 0.012 in or less | |||
Supply voltage | 10 to 30 V DC Ripple P-P 10 % or less | ||||
Current consumption | Emitter: 20 mA or less Receiver: 25 mA or less |
25 mA or less | |||
Output | <NPN output type> NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1.5 V or less (at 100 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 100 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 1.5 V or less (at 100 mA source current) |
||||
Utilization category | DC-12 or DC-13 | ||||
Output operation | Selectable either Light-ON or Dark-ON by the control input | ||||
Short-circuit protection | Incorporated | ||||
Response time | 2 ms or less | ||||
Test input (emission halt) function | Incorporated | - | |||
Operation indicator | Red LED (lights up when the output is ON) | ||||
Emission indicator | Red LED (lights up during beam emission) |
- | |||
Pollution degree | 3 (Industrial environment) | ||||
Protection | IP67 (IEC) (Refer to p.984 for details of standards.) | ||||
Ambient temperature | -25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉ |
||||
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | ||||
Ambient illuminance | Incandescent light: 3,000 lx at the light-receiving face | ||||
EMC | EN 60947-5-2 | ||||
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure | ||||
Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure | ||||
Vibration resistance | 10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each | ||||
Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each | ||||
Emitting element | Infrared LED (modulated) | Red LED (modulated) | Infrared LED (modulated) | ||
Peak emission wavelength | 950 nm 0.037 mil | 660 nm 0.026 mil | 950 nm 0.037 mil | ||
Material | Enclosure: PBT, Lens: Polycarbonate | Enclosure: PBT, Front cover: Acrylic | |||
Cable | 0.34 mm2 4-core (thru-beam type emitter: 3-core) cabtyre cable, 2 m 6.562 ft long | ||||
Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.34 mm2, or more, cable (thru-beam type: both emitter and receiver). | ||||
Net Weight | Emitter: 90 g approx. Receiver: 100 g approx. |
100 g approx. | |||
Accessories | Nut: 4 pcs. | Nut: 2 pcs. |
Note 1 : | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉. |
---|---|
Note 2 : | The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-230 reflector (optional). |
Note 3 : | The sensing range and the hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object. |
Note 4 : | Make sure to confirm detection with an actual sensor before use. |
Type | Thru-beam | Retroreflective | Diffuse reflective | ||
---|---|---|---|---|---|
With polarizing filters | |||||
Model No. | Light-ON | CY-11A | CY-17A | CY-19A | CY-12A |
Dark-ON | CY-11B | CY-17B | CY-19B | CY-12B | |
Sensing range | 12 m 39.370 ft | 3 m 9.843 ft (Note 2) |
1.5 m 4.921 ft (Note 2) |
120 mm 4.724 in (Note 3) | |
Sensing object | ø8 mm ø0.315 in or more opaque object (Completely beam interrupted object) |
ø50 mm ø1.969 in or more opaque or translucent object (Note 2, 4) |
ø50 mm ø1.969 in or more opaque, translucent or specular object (Note 2, 4) | Opaque, translucent or transparent object (Note 4) | |
Hysteresis | - | 15 % or less of operation distance (Note 3) |
|||
Repeatability (perpendicular to sensing axis) |
0.1 mm 0.004 in or less | 0.3 mm 0.012 in or less | |||
Supply voltage | 24 to 240 V AC + 10/- 15 % | ||||
Power consumption | Emitter: 1.5 VA or less Receiver: 2.5 VA or less |
2.7 VA or less | |||
Output | AC non-contact (thyristor) output ・Load current: 5 to 200 mA ・Applied voltage: 24 to 240 V AC + 10/- 15 % ・Residual voltage: 4 V or less (at 200 mA load current) |
||||
Response time | 20 ms or less | ||||
Operation indicator | Red LED (lights up when the output is ON), incorporated on the receiver for the thru-beam type sensor |
||||
Power indicator | Red LED (lights up when the power is ON), incorporated on the emitter |
- | |||
Pollution degree | 3 (Industrial environment) | ||||
Protection | IP67 (IEC) (Refer to p.984 for details of standards.) | ||||
Ambient temperature | -25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉ |
||||
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | ||||
Ambient illuminance | Incandescent light: 3,000 lx at the light-receiving face | ||||
EMC | EN 61000-6-2, EN 61000-6-4 | ||||
Voltage withstandability | 1,500 V AC for one min. between all supply terminals connected together and enclosure | ||||
Insulation resistance | 20 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure | ||||
Vibration resistance | 10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each | ||||
Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each | ||||
Emitting element | Infrared LED (modulated) | Red LED (modulated) | Infrared LED (modulated) | ||
Peak emission wavelength | 950 nm 0.037 mil | 660 nm 0.026 mil | 950 nm 0.037 mil | ||
Material | Enclosure: PBT, Lens: Polycarbonate | Enclosure: PBT, Front cover: Acrylic | |||
Cable | 0.34 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 2 m 6.562 ft long | ||||
Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.34 mm2, or more, cable (thru-beam type: both emitter and receiver). | ||||
Net weight | Emitter: 90 g approx. Receiver: 100 g approx. |
100 g approx. | |||
Accessories | Nut: 4 pcs. | Nut: 2 pcs. |
Note 1 : | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉. |
---|---|
Note 1 : | The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-230 reflector (optional). |
Note 1 : | The sensing range and the hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object. |
Note 1 : | Make sure to confirm detection with an actual sensor before use. |
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)