AUTOMATION
CONTROLS

Search
Discontinued
Products



Water Detection Sensor EZ-10

Option

Option

Designation Model No. Description
Round slit mask OS-CX-05
(Slit size Ø0.5mm Ø0.020 in)		 Slit on one side / Sensing range: 200 mm 7.874 in
Slit on both sides / Sensing range: 10 mm 0.394 in
OS-CX-1
(Slit size Ø1mm Ø0.039 in)		 Slit on one side / Sensing range: 400 mm 15.748 in
Slit on both sides / Sensing range: 60 mm 2.362 in
OS-CX-2
(Slit size Ø2mm Ø0.079 in)		 Slit on one side / Sensing range: 1 m 3.281 ft
Slit on both sides / Sensing range: 250 mm 9.843 in
Rectangular
slit mask		 OS-CX-05x6
(Slit size 0.5 x 6mm 0.020 x 0.236 in)		 Slit on one side / Sensing range: 800 mm 31.496 in
Slit on both sides / Sensing range: 250 mm 9.843 in
OS-CX-1x6
(Slit size 1 x 6mm 0.039 x 0.236 in)		 Slit on one side / Sensing range: 1.3 m 4.265 ft
Slit on both sides / Sensing range: 600 mm 23.622 in
OS-CX-2x6
(Slit size 2 x 6mm 0.079 x 0.236 in)		 Slit on one side / Sensing range: 2 m 6.562 ft
Slit on both sides / Sensing range: 1.3 m 4.265 ft
Sensor mounting
bracket (Note 1)		 MS-CX2-1 Foot angled mounting bracket
(Two brackets are required.)
MS-CX2-2 Foot biangled mounting bracket
(Two brackets are required.)
MS-CX2-4 Protective mounting bracket
(Two brackets are required.)
MS-CX2-5 Back biangled mounting bracket
(Two brackets are required.)
MS-CX-3 Back angled mounting bracket
(Two brackets are required.)
Universal
sensor
mounting stand
(Note 2)		 MS-AJ1 Horizontal mounting type Basic assembly
MS-AJ2 Vertical mounting type
MS-AJ1-A Horizontal mounting type Lateral arm assembly
MS-AJ2-A Vertical mounting type
(Note 1)：The plug-in connector type sensor does not allow use of some sensor mounting brackets because of the protrusion of the connector.
(Note 2)：Refer to the MS-AJ series for details of the universal sensor mounting stand.

Round slit mask

OS-CX-口

Used for narrowing the beam for cases when detecting water or other substances inside slender pipes.
Fitted on the front face of the sensor with one-touch.

Rectangular slit mask

OS-CX-口×6

Used for narrowing the beam for cases when detecting water or other substances inside slender pipes.
Fitted on the front face of the sensor with one-touch.

Sensor mounting bracket

MS-CX2-1

Two M3 (length 12 mm 0.472 in) screws with washers are attached.

MS-CX2-2

Two M3 (length 12 mm 0.472 in) screws with washers are attached.

MS-CX2-4

Two M3 (length 14 mm 0.551 in) screws with washers are attached.

MS-CX2-5

Two M3 (length 12 mm 0.472 in) screws with washers are attached.

MS-CX-3

Two M3 (length 12 mm 0.472 in) screws with washers are attached.

Universal sensor mounting stand

MS-AJ1

MS-AJ1-A

With the lateral arm, the sensor can sense from above a production line.

MS-AJ2

MS-AJ2-A

With the lateral arm, the sensor can sense from above a production line.

Return to top

Option
CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region



Related Information
Service & Support

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)