Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Photoelectric Sensors / Laser Sensors > Triple Beam Adjustable Range Reflective Photoelectric Sensor MQ-W(Discontinued Products) > Specifications
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
|
Type | Triple beam adjustable range reflective | |||
---|---|---|---|---|
40 mm 1.575 in type | ||||
Visible light | Low hysteresis | |||
Basic Model No. | MQ-W3A□ | MQ-W3AR□ | MQ-WN3A□ | |
Sensing distance (rated) | 40 mm 1.575 in with white non-glossy paper (10 x 10 mm 0.394 x 0.394 in) |
|||
Setting range (optimum) | 20 to 40 mm 0.787 to 1.575 in with white non‑glossy paper (10 x 10 mm 0.394 x 0.394 in) |
|||
Sensing object | Opaque or translucent object (Note 2) | |||
Hysteresis (Note 3) | 10 % or less of operation distance (with standard sensing object) |
5 % or less of operation distance (with standard sensing object) |
||
Supply voltage | 9.6 to 30 V DC | |||
Current consumption | 30 mA or less | |||
Output | NPN open-collector transistor • Maximum sink current: 100 mA • Applied voltage: 30 V DC or less (between output and 0 V) • Residual voltage: 1.2 V or less (at 100 mA sink current) |
|||
Output operation | Selectable either Light-ON or Dark-ON by the control input | |||
Response time | 2 ms or less (Response frequency: 250 Hz or more) | |||
Operation indicator | Red LED (lights up under light received condition) | |||
Stability indicator | Red LED (lights up under stable sensing condition) | |||
Distance adjuster | Continuously variable adjuster | |||
Protection | IP67 (IEC) | |||
Ambient temperature | –25 to +55 ℃ –13 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +55 ℃ –13 to +131 ℉ |
|||
Ambient humidity | 85 % RH or less, Storage: 85 % RH or less | |||
Ambient illuminance | Incandescent light: 10,000 Lx or less at the light-receiving face | |||
Voltage withstandability | 500 V AC for one min. between all supply terminals connected together and enclosure | |||
Insulation resistance | 20 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure | |||
Vibration resistance | 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each | |||
Shock resistance | 1,000 m/s2 acceleration (100 G approx.) in X, Y and Z directions six times each | |||
Emitting element (modulated) | Infrared LED | Red LED | Infrared LED | |
Material | Enclosure: Die-cast zinc alloy | |||
Cable | 4-core cable, 2 m 6.562 ft long | |||
Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | |||
Accessory | Mounting bracket: 1 set |
Notes:
1) | Where measurement conditions have not been specified precisely, the conditions use were an ambient temperature of +23 ℃ +73.4 ℉. |
---|---|
2) | Make sure to confirm detection with an actual sensor before use. |
3) | This value is from the sensing distance (rated). The standard sensing object is non-glossy paper described in the "Sensing distance (rated)" item. |
Type | Triple beam adjustable range reflective | |||
---|---|---|---|---|
200 mm 7.874 in type | ||||
Visible light | Low hysteresis | |||
Basic Model No. | MQ-W20A□ | MQ-W20AR□ | MQ-WN20A□ | |
Sensing distance (rated) | 200 mm 7.874 in with white non-glossy paper (20 x 20 mm 0.787 x 0.787 in) |
|||
Setting range (optimum) | 40 to 200 mm 1.575 to 7.874 in with white non‑glossy paper (20 x 20mm 0.787 x 0.787 in) |
|||
Sensing object | Opaque or translucent object (Note 2) | |||
Hysteresis (Note 3) | 20 % or less of operation
distance (with standard sensing object) |
10 % or less of operation distance (with standard sensing object) |
||
Supply voltage | 9.6 to 30 V DC | |||
Current consumption | 30 mA or less | |||
Output | NPN open-collector transistor • Maximum sink current: 100 mA • Applied voltage: 30 V DC or less (between output and 0 V) • Residual voltage: 1.2 V or less (at 100 mA sink current) |
|||
Output operation | Selectable either Light-ON or Dark-ON by the control input | |||
Response time | 2 ms or less (Response frequency: 250 Hz or more) | |||
Operation indicator | Red LED (lights up under light received condition) | |||
Stability indicator | Red LED (lights up under stable sensing condition) | |||
Distance adjuster | Continuously variable adjuster | |||
Protection | IP67 (IEC) | |||
Ambient temperature | –25 to +55 ℃ –13 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +55 ℃ –13 to +131 ℉ |
|||
Ambient humidity | 85 % RH or less, Storage: 85 % RH or less | |||
Ambient illuminance | Incandescent light: 10,000 Lx or less at the light-receiving face | |||
Voltage withstandability | 500 V AC for one min. between all supply terminals connected together and enclosure | |||
Insulation resistance | 20 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure | |||
Vibration resistance | 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each | |||
Shock resistance | 1,000 m/s2 acceleration (100 G approx.) in X, Y and Z directions six times each | |||
Emitting element (modulated) | Infrared LED | Red LED | Infrared LED | |
Material | Enclosure: Die-cast zinc alloy | |||
Cable | 4-core cable, 2 m 6.562 ft long | |||
Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | |||
Accessory | Mounting bracket: 1 set |
Notes:
1) | Where measurement conditions have not been specified precisely, the conditions use were an ambient temperature of +23 ℃ +73.4 ℉. |
---|---|
2) | Make sure to confirm detection with an actual sensor before use. |
3) | This value is from the sensing distance (rated). The standard sensing object is non-glossy paper described in the "Sensing distance (rated)" item. |
Type | Triple beam adjustable range reflective | ||
---|---|---|---|
700 mm 27.559 in type | |||
Low hysteresis | |||
Basic Model No. | MQ-W70A□ | MQ-WN70A□ | |
Sensing distance (rated) | 700 mm 27.559 in with white non-glossy paper (75 x 75 mm 2.953 x 2.953 in) |
||
Setting range (optimum) | 200 to 700 mm 7.874 to 27.559 in with white non‑glossy paper (75 x 75 mm 2.953 x 2.953 in) |
||
Sensing object | Opaque or translucent object (Note 2) | ||
Hysteresis (Note 3) | 20 % or less of operation distance (with standard sensing object) |
10 % or less of operation distance (with standard sensing object) |
|
Supply voltage | 9.6 to 30 V DC | ||
Current consumption | 30 mA or less | ||
Output | NPN open-collector transistor • Maximum sink current: 100 mA • Applied voltage: 30 V DC or less (between output and 0 V) • Residual voltage: 1.2 V or less (at 100 mA sink current) |
||
Output operation | Selectable either Light-ON or Dark-ON by the control input | ||
Response time | 2 ms or less (Response frequency: 250 Hz or more) | ||
Operation indicator | Red LED (lights up under light received condition) | ||
Stability indicator | Red LED (lights up under stable sensing condition) | ||
Distance adjuster | Continuously variable adjuster | ||
Protection | IP67 (IEC) | ||
Ambient temperature | –25 to +55 ℃ –13 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +55 ℃ –13 to +131 ℉ |
||
Ambient humidity | 85 % RH or less, Storage: 85 % RH or less | ||
Ambient illuminance | Incandescent light: 10,000 Lx or less at the light-receiving face | ||
Voltage withstandability | 500 V AC for one min. between all supply terminals connected together and enclosure | ||
Insulation resistance | 20 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure | ||
Vibration resistance | 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each | ||
Shock resistance | 1,000 m/s2 acceleration (100 G approx.) in X, Y and Z directions six times each | ||
Emitting element (modulated) | Infrared LED | ||
Material | Enclosure: Die-cast zinc alloy | ||
Cable | 4-core cable, 2 m 6.562 ft long | ||
Cable extension | Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. | ||
Accessory | Mounting bracket: 1 set |
Notes:
1) | Where measurement conditions have not been specified precisely, the conditions use were an ambient temperature of +23 ℃ +73.4 ℉. |
---|---|
2) | Make sure to confirm detection with an actual sensor before use. |
3) | This value is from the sensing distance (rated). The standard sensing object is non-glossy paper described in the "Sensing distance (rated)" item. |
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)