Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Inductive Proximity Sensors > Micro-size Inductive Proximity Sensor GA-10/GH(Discontinued Products) > Specifications
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
|
Type | One-touch clamping | Screw tightening | |
---|---|---|---|
Model No. | GA-14 | GA-15 | |
Applicable sensor head | GH series | ||
Supply voltage | 12 to 24 V DC±10 % Ripple P-P 10 % or less | ||
Current consumption | 25 mA or less | ||
Output | NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between sensing output and 0 V) ・Residual voltage: 3 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current) |
||
Output operation | Switchable either Normally open or Normally closed | ||
Short-circuit protection | Incorporated | ||
Max. response frequency | 3.3kHz | ||
Operation indicator | Red LED (lights up when the sensing output is ON) | ||
Disconnection alarm indicator | Orange LED (lights up when the disconnection alarm output is ON) | ||
Sensitivity adjuster | 18-turn adjuster | ||
Ambient temperature | -10 to +60 ℃ +14 to +140 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉ |
||
Material | Enclosure: Heat-resistant ABS, Cover: Polycarbonate Cable lock lever: PPS (GA-14 only), DIN rail stopper: POM |
||
Connecting method | 0.2 mm2 4-core cabtyre cable, 2 m 6.562 ft long | ||
Weight | 65 g approx. | ||
Accessories | MS-DIN-2 (Amplifier mounting bracket): 1 pc., Adjusting screwdriver: 1 pc. |
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)