Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Inductive Proximity Sensors > Compact & Low Price Inductive Proximity Sensor GL(Discontinued Products) > Specifications

Compact & Low Price Inductive Proximity Sensor GL (Discontinued Products)

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.

	September 30, 2021

Discontinued Products
Information

Specifications

Dimensions

Circuit/ Wiring

Sensing characteristics

Cautions For Use

Specifications

GL-18H/18HL type

Type		Standard
Type			Different frequency
Model No.		GL-18H	GL-18HI	GL-18HB
CE marking directive compliance		EMC Directive, RoHS Directive
Max. operation distance (Note 2)		5 mm 0.197 in ± 10 %
Stable sensing range (Note 2)		0 to 4 mm 0 to 0.157 in
Standard sensing object		Iron sheet 25 x 25 x t 1 mm 0.984 x 0.984 x t 0.039 in
Hysteresis		15 % or less of operation distance (with standard sensing object)
Supply voltage		10 to 30 V DC Ripple P-P 10 % or less
Current consumption		10 mA or less
Output		NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1.5 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current)
	Utilization category	DC-12 or DC-13
	Output operation	Normally open		Normally closed
Max. response frequency		1kHz
Operation indicator		Red LED (lights up when the output is ON)
Pollution degree		3 (Industrial environment)
Protection		IP67 (IEC), IP67G (Note 3)
Ambient temperature		-25 to +70 ℃ -13 to +158 ℉, Storage: -25 to +70 ℃ -13 to +158 ℉
Ambient humidity		45 to 85 % RH, Storage: 45 to 85 % RH
Voltage withstandability		1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance		50 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance		10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
Shock resistance		1,000 m/s² acceleration (100 G approx.) in X, Y and Z directions three times each
Sensing range variation	Temperature characteristics	Over ambient temperature range -25 to +70 ℃ -13 to +158 ℉ : within ±10 % of sensing range at +20 ℃ +68 ℉
Sensing range variation	Voltage characteristics	Within ±2 % for ±10 % fluctuation of the supply voltage
Material		Enclosure: Polyarylate
Cable		0.3 mm² 3-core oil resistant cabtyre cable, 1 m 3.281 ft long
Cable extension		Extension up to total 100 m 328.084 ft is possible with 0.3 mm², or more, cable.
Weight		Net weight : 45 g approx.
Accessory		-

Type		Long sensing range
Type			Different frequency
Model No.		GL-18HL	GL-18HLI	GL-18HLB
CE marking directive compliance		EMC Directive, RoHS Directive
Max. operation distance (Note 2)		12 mm 0.472 in ± 10 %
Stable sensing range (Note 2)		0 to 10 mm 0 to 0.394 in
Standard sensing object		Iron sheet 40 x 40 x t 1 mm 1.575 x 1.575 x t 0.039 in
Hysteresis		15 % or less of operation distance (with standard sensing object)
Supply voltage		10 to 30 V DC Ripple P-P 10 % or less
Current consumption		10 mA or less
Output		NPN open-collector transistor - Maximum sink current: 100 mA - Applied voltage: 30 V DC or less (between output and 0 V) - Residual voltage: 1.5 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current)
	Utilization category	DC-12 or DC-13
	Output operation	Normally open		Normally closed
Max. response frequency		500Hz
Operation indicator		Red LED (lights up when the output is ON)
Pollution degree		3 (Industrial environment)
Protection		IP67 (IEC), IP67G (Note 3)
Ambient temperature		-25 to +70 ℃ -13 to +158 ℉, Storage: -25 to +70 ℃ -13 to +158 ℉
Ambient humidity		45 to 85 % RH, Storage: 45 to 85 % RH
Voltage withstandability		1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance		50 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance		10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
Shock resistance		1,000 m/s² acceleration (100 G approx.) in X, Y and Z directions three times each
Sensing range variation	Temperature characteristics	Over ambient temperature range -25 to +70 ℃ -13 to +158 ℉ : within ±10 % of sensing range at +20 ℃ +68 ℉
Sensing range variation	Voltage characteristics	Within ±2 % for ±10 % fluctuation of the supply voltage
Material		Enclosure: Polyarylate
Cable		0.3 mm² 3-core oil resistant cabtyre cable, 1 m 3.281 ft long
Cable extension		Extension up to total 100 m 328.084 ft is possible with 0.3 mm², or more, cable.
Weight		Net weight : 45 g approx.
Accessory		MS-GL18HL (Sensor mounting bracket): 1 set

Notes:

1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.

2) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation.

3) If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil.
Please check the resistivity of the sensor against the cutting oil you are using beforehand.

1)	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2)	The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation.
3)	If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.

GL-8U type

Type		DC 2-wire type
Type		Front sensing		Top sensing
Model No.		GL- 8FUx10	GL- 8FUBx10	GL- 8HUx10	GL- 8HUBx10
Model No.	Different frequency	GL- 8FUIx10	GL- 8FUIBx10	GL- 8HUIx10	GL- 8HUIBx10
Max. operation distance (Note 2)		2.5 mm 0.098 in ± 20 %
Stable sensing range (Note 2)		0 to 1.8 mm 0 to 0.071 in
Standard sensing object		Iron sheet 15 x 15 x t 1 mm 0.591 x 0.591 x t 0.039 in
Hysteresis		20 % or less of operation distance (with standard sensing object)
Supply voltage		12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption		0.8 mA or less (Note 3)
Output		Non-contact DC 2-wire type - Load current: 3 to 70 mA (Note 4) - Residual voltage: 3 V or less (Note 5)
	Utilization category	DC-12 or DC-13
	Output operation	Normally open	Normally closed	Normally open	Normally closed
	Short-circuit protection	Incorporated
Max. response frequency		1kHz
Operation indicator		Orange LED (lights up when the output is ON)
Pollution degree		3 (Industrial environment)
Protection		IP67 (IEC)
Ambient temperature		-25 to +70 ℃ -13 to +158 ℉, Storage: -30 to +80 ℃ -22 to +176 ℉
Ambient humidity		35 to 95 % RH, Storage: 35 to 95 % RH
Voltage withstandability		1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance		50 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance		10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
Shock resistance		1,000 m/s² acceleration (100 G approx.) in X, Y and Z directions three times each
Sensing range variation	Temperature characteristics	Over ambient temperature range -25 to +70 ℃ -13 to +158 ℉ : within ⁺¹⁰ _-15 % of sensing range at +20 ℃ +68 ℉
Sensing range variation	Voltage characteristics	Within ±2 % for ±10 % fluctuation of the supply voltage
Material		Enclosure: Polyarylate
Cable		0.15 mm² 2-core cabtyre cable, 1 m 3.281 ft long
Cable extension		Extension up to total 50 m 164.042 ft is possible with 0.3 mm², or more, cable.
Weight		Net weight : 12 g approx.

Notes:

1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.

2) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation.

3) It is the leakage current when the output is in the OFF state.

4) The maximum load current varies depending on the ambient temperature.

5) When the cable is extended, the residual voltage becomes larger according to the resistance of the cable.

1)	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2)	The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object. The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation.
3)	It is the leakage current when the output is in the OFF state.
4)	The maximum load current varies depending on the ambient temperature.
5)	When the cable is extended, the residual voltage becomes larger according to the resistance of the cable.