Business
> Industrial Devices
> Automation Controls Top
> FA Sensors & Components
> Sensors
> Wire-Saving Systems
> Picking Switch for Shutter SL-VPK02
> Specifications
Picking Switch for Shutter SL-VPK02
|
Discontinuation plan
|
Specifications
Picking switch
| Model No. | SL-VPK02 |
|---|---|
| Power supply voltage | 24V DC±10%(Supplied from a S-LINK V control unit. A separate power supply is also available.) |
| Current consumption | 24 V DC line: 25 mA or less (When the lamp is ON) Current for shutter operation: 450 mA or less |
| Communication specification | Complies with S-LINK V protocol. |
| Communication mode | B mode, C mode |
| Address setting (using optional remote controller) |
Input address (lever switch): 0 to 255 Output address (lamp, shutter): Select an offset of +32, +64, +128, or +256 from the input address. |
| Number of I/Os | 1 lever input, 1 lamp or shutter output |
| Lever switch (Input) | Turns ON when lever switch is tilted to angle of 15° to 30° or pulled downward for a distance of about 2 mm 0.079 in or more.(Note) |
| Lamp (Output) | Lamp (LED) color: Selectable from green (default), red, blue or 2-stage indication (green, blue) Turns ON when output signal from signal transmission line turns ON. Turns OFF when output signal from signal transmission line turns OFF. |
| Recommended shutter | Material: Danpla (plastic board) Maximum thickness: 5 mm 0.197 in Maximum weight: 50 g approx. Recommended size: W300 x H210 mm W11.811 x H8.268 in |
| Ambient temperature | 0 to +50 ℃ +32 to +122 ℉ (No dew condensation) Storage: -20 to +60 ℃ -4 to +140 ℉ |
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Material | Front cover: Polycarbonate Lamp cover: Polycarbonate, Rear case: ABS Pipe mounting holder: Cold rolled carbon steel (SPCC) Driving shaft: SUM Arm: Cold rolled carbon steel (SPCC) |
| Cable | 4-core cabtyre cable, 0.15 m 0.492 ft long (With a snap male connector SL-CP2) |
| Weight | 250g approx. |
| Note : | Pulling load is 19.6N or less. Make sure that stress by forcible bend or pulling is not applied directly to the lever part. |
|---|
Address setting remote controller
| Model No. | SL-VAR1 |
|---|---|
| Supply voltage | AAA alkaline batteries: 2 pcs (Note) |
| Auto sleep | Incorporated (3 minutes) |
| Transmission method | Infrared (Peak emission wavelength: 940 nm 0.037 mil) |
| Setting distance (Max) | 100 mm 3.973 in or less |
| Ambient temperature | 5 to +45℃ +41 to + 113℉ (No dew condensation), Storage: 0 to +55℃ -32 to +131℉ |
| Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Material | Enclosure: ABS, Control panel: Polycarbonate Communications window cover: Polycarbonate Cover: Silicone, Mounting clip: Nylon, Keyring: SWRM6 |
| Net weight | 160 g approx. (excluding batteries) |
Note: Batteries not included. Please purchase separately.
Mounting
Use ø28 mm ø1.102 in pipes for the installation of the product.
CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT US
BY EMAIL
BY EMAIL
Please click your area to select country or region
Related Information
Service & Support
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)
- COMPONENTS & DEVICES
- FA SENSORS & COMPONENTS
- Fiber Sensors
- Photoelectric Sensors / Laser Sensors
- Micro Photoelectric Sensors
- Light Curtains / Safety Components
- Area Sensors
- Inductive Proximity Sensors
- Particular Use Sensors
- Sensor Options
- Wire-Saving Systems
- Programmable Controllers / Interface Terminal
- Human Machine Interface
- Pressure Sensors / Flow Sensors
- Measurement Sensors
- Static Control Devices
- Laser Markers / 2D Code Readers
- Machine Vision System
- Energy Management Solutions
- Timers / Counters / FA Components
- MOTORS
