Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Pressure Sensors / Flow Sensors > Pressure Sensors / Flow Sensors > Head-separated Dual Display Digital Pressure Sensor [For Gas] DPS-400 / DPH-100 > Part Number > DPH-103-M5-R-C5
*Photo may vary from actual product.
Product Number | DPH-103-M5-R-C5 |
Part Number | DPH-103-M5-R-C5 |
Product | Head-separated Dual Display Digital Pressure Sensor [For gas] |
Details | Sensor head |
Product name | Head-separated Dual Display Digital Pressure Sensor [For Gas] DPS-400 / DPH-100 |
As of June 17, 2024
Specifications and design of the products are subject to change without notice for the product improvement.
Item | Specifications |
---|---|
Product Number | DPH-103-M5-R-C5 |
Part Number | DPH-103-M5-R-C5 |
CE marking directive compliance | EMC Directive, RoHS Directive |
Type of pressure | Gauge pressure |
Rated pressure range | 0 to -101.0 kPa |
Pressure withstandability | 500 kPa |
Applicable fluid | Air, non-corrosive gas |
Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less |
Current consumption | 15 mA or less |
Analog voltage output | Output voltage : 1 to 5 V (over rated pressure range) Zero point : within 1 V ± 2.5 % F.S. (vacuum / positive pressure type) within 3 V ± 3 % F.S. (compound pressure type) Span : within 4 V ± 3.5 % F.S. Linearity : within ±0.5 % F.S. Output impedance : 1 kΩ approx. |
Protection | IP40 (IEC) |
Ambient temperature | 0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), Storage : -10 to +60 ℃ +14 to +140 ℉ |
Ambient humidity | 35 to 85 % RH, Storage : 35 to 85 % RH |
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Insulation resistance | 50 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure |
Vibration resistance | 10 to 500 Hz frequency, amplitude 3 mm 0.118 in or maximum acceleration 196 m/s2, in X, Y and Z directions for two hours each |
Shock resistance | 1,000 m/s2 acceleration (100 G approx.) in X, Y and Z directions for three times each |
Temperature characteristics | Over ambient temperature range 0 to +50 ℃ +32 to +122 ℉ : within ±2 % F.S. of detected pressure at +25 ℃ +77 ℉ |
Pressure port | M5 male thread (for installing gasket) |
Material | Front case : PBT, Rear case : PBT (glass fiber reinforced), Pressure port : Stainless steel (SUS303), O-ring : NBR Pressure element : Silicon diaphragm, PPS |
Connecting method | Connector |
Cable | 0.2 mm2 4-core oil resistant cabtyre cable (Models with "-R" affixed to the Model No. have bending-resistant, oil-resistant cabtyre cable) |
Cable extension | Extension up to total 10 m 32.808 ft is possible with 0.2 mm2, or more, cable. |
Weight : Net weight | Head 6 g approx. / Cable 40 g approx. |
Weight : Gross weight | 70 g approx. |
Accessories | Connector (e-CON) : 1 pc. |
Remark | Where measurement conditions have not been specifi ed precisely, the conditions used were an ambient temperature of +25 ℃ +77 ℉. The sensor head can be used independently. |
Product Number | CN-EP2 |
Part Number | CN-EP2 |
Product name | Connector |
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)