Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Static Control Devices > Static Control Devices > Pulse AC Method Area Ionizer ER-X > Part Number > ER-XC02
*Photo may vary from actual product.
Product Number | ER-XC02 |
Part Number | ER-XC02 |
Product | Pulse AC Method Area Ionizer |
Details | Controller |
Product name | Pulse AC Method Area Ionizer ER-X |
As of April 26, 2024
Specifications and design of the products are subject to change without notice for the product improvement.
Item | Specifications |
---|---|
Product Number | ER-XC02 |
Part Number | ER-XC02 |
Applicable regulations | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), TÜV SÜD certification (USA, Canada) |
Ambient temperature | 0 to +50 °C +32 to +122 °F (No dew condensation), Storage: -10 to +65 °C +14 to +149 °F |
Ambient humidity | 35 to 65 % RH, Storage: 35 to 85 % RH |
Vibration resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each |
Shock resistance | 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each |
Enclosure earthing | Floating |
Material | Enclosure: ABS |
Weight | Net weight : 130 g approx. |
Number of heads connected | Maximum 2 units |
Supply voltage | 24 V DC ±10 % |
Current consumption | 450 mA or less when connecting 1 heads, 800 mA or less when connecting 2 heads |
Indicators | Displays status of Head 1 and 2 |
Indicators:Discharge (DSC) | Green LED (lights up when discharging) |
Indicators:Check (CHECK) | Orange LED (lights up when dirt, wear, etc. of the discharge needle is detected) |
Indicators:Error (ERROR) | Red LED (lights up when abnormal discharge is detected) |
Indictor:Level meter | Green LED (5 levels, lights up depending on amount of the charge or ion generation) |
Output[ALARM, ERROR ,COM(Common)] | PhotoMOS relay output • Maximum load current: 100 mA • Applied voltage: 30 V DC or less (between output-output common) • Residual voltage: 1.5 V or less (at load current of 100 mA) |
Output[ALARM, ERROR ,COM(Common)]:Output operation | ALARM: ON when dirt or wear of the discharge needle is detected; OFF when operation is normal. ERROR: OFF when abnormal discharge is detected; ON when operation is normal. |
Output[ALARM, ERROR ,COM(Common)]:Short-circuit protection | Incorporated (automatic reset type) |
Discharge control input (DSC OFF) | Discharge allowed: Open, Discharge halt: 24 V or 0 V shorted |
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
Accessories | Power supply / I/O connector: 1 set (Housing 5557-10R, Terminal 5556TL [manufactured by Molex]) Ground wire (3.7 m 12.139 ft approx.): 1 pc. |
Product Number | ER-X001 |
Part Number | ER-X001 |
Product | Pulse AC Method Area Ionizer |
Details | Head |
Product name | Pulse AC Method Area Ionizer ER-X |
Product Number | ER-X016 |
Part Number | ER-X016 |
Product | Pulse AC Method Area Ionizer |
Details | Head |
Product name | Pulse AC Method Area Ionizer ER-X |
Product Number | ER-X032 |
Part Number | ER-X032 |
Product | Pulse AC Method Area Ionizer |
Details | Head |
Product name | Pulse AC Method Area Ionizer ER-X |
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)