AUTOMATION
CONTROLS

Search
Discontinued
Products



HL-D3C | High Speed, Multi-Point Laser Displacement Sensor HL-D3(Discontinued)

  • Print This Page

High Speed, Multi-Point Laser Displacement Sensor HL-D3(Discontinued)

*Photo may vary from actual product.



  • Discontinued
  • Last time buySeptember 30, 2021
Product Number HL-D3C
Part Number HL-D3C
Product High Speed, Multi-Point Laser Displacement Sensor
Details Controller
Product name High Speed, Multi-Point Laser Displacement Sensor HL-D3(Discontinued)
  • Substitute -
  • Sub Prod No. -
  • Sub Part No. -
  • Remark Sorry, no suggested alternative products.

Spec Detail As of September 30, 2021

Item Specifications
Product Number HL-D3C
Part Number HL-D3C
Applicable sensor heads HL-D301B, HL-D301C
Connectable sensor heads Number of connectable units: Max. 2 units
Supply voltage 24 V DC ±10 % including ripple 0.5 V (P-P)
Current consumption 1 A or less (when 2 sensor heads are connected)
Sampling rate Depends on the sensing mode and settings
Multi-zone beam control mode : Standard 12.2 ms (Note 1)
Whole synchronized measurement mode : Max. 2.5 ms (Note 2)
Multi-select displacement sensing mode : Max. 80 μs (Note 3)
(Note 1):Value for using two judgment outputs with 1 sensor head in MZBC mode, with each measuring range set to Max. and light intensity not adjusted (continuous sensing).
(Note 2):Value for obtaining displacement shape waveform data using buffering and 2 sensor heads in whole synchronized measurement mode, with each measuring range set to Min. (no OUT calculation).
(Note 3):Value for using 2 judgment outputs with 1 sensor head in MSDS mode, with the unit light receiving time set to 40 μs, light intensity not adjusted (continuous), and 2 points selected (without wide cell function).
Judgment output N-channel FET, open drain
• Maximum sink current: 100 mA
• Applied voltage: 30 V DC or less (between output terminal and 0 V)
• ON-resistance: 5 Ω or less
Judgment output : Output operation Open during output operation (switchable)
Judgment output : Short-circuit protection Incorporated
Alarm output N-channel FET, open drain
• Maximum sink current: 100 mA
• Applied voltage: 30 V DC or less (between output terminal and 0 V)
• ON-resistance: 5 Ω or less
Alarm output : Output operation Open when alarm is triggered (switchable)
Alarm output : Short-circuit protection Incorporated
External trigger input Photocoupler insulation input
External trigger input : Input operation ON: short-circuiting to external insulation COM (-) , OFF: when open
External trigger input : Applied voltage 30 V DC or less (leakage current: 0.1 mA or less)
Laser control input Photocoupler insulation input
Laser control input : Input operation Laser emission: short-circuiting to external insulation COM (-) , Laser emission OFF: when open
Laser control input : Applied voltage 30 V DC or less (leakage current: 0.1 mA or less)
Zero set input Photocoupler insulation input
Zero set input : Input operation ON: short-circuiting to external insulation COM (-) , OFF: when open
Zero set input : Applied voltage 30 V DC or less (leakage current: 0.1 mA or less)
Timing input Photocoupler insulation input
Timing input : Input operation ON: short-circuiting to external insulation COM (-) , OFF: when open
Timing input : Applied voltage 30 V DC or less (leakage current: 0.1 mA or less)
Reset input Photocoupler insulation input
Reset input : Input operation ON: short-circuiting to external insulation COM (-) , OFF: when open
Reset input : Applied voltage 30 V DC or less (leakage current: 0.1 mA or less)
RS-232C interface Baud rate: 9,600, 19,200, 38,400, 57,600, 115,200 bit/s(Note):Products produced from September 2013 (Ver. 2) are also compatible with 9,600, 19,200 and 38,400 bit/s.
USB interface USB 2.0 full-speed (USB 1.1 compatible)
Settings / Data display HL-D3SMI (accessory) or dedicated API
Indicator : Power Green LED (lights up at power on)
Indicator : Sensor head A Laser radiation Green LED
[During continuous sensing: lights up during laser emission, blinks twice when turning off
During sensing stop process: alternately lights up during laser emission (ON: 1 sec / OFF: 1 sec), blinks once when turning off]
Indicator : Sensor head B Laser radiation Green LED
[During continuous sensing: lights up during laser emission, blinks twice when turning off
During sensing stop process: alternately lights up during laser emission (ON: 1 sec / OFF: 1 sec), blinks once when turning off]
Indicator : Alarm Red LED
(lights up when there is a sensing alarm or sensor head wire breakage)
Environmental resistance : Ambient temperature 0 to +50 ℃ +32 to +122 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉
Environmental resistance : Ambient humidity 35 to 85 % RH , Storage: 35 to 85 % RH
Environmental resistance : Vibration resistance 10 to 55 Hz frequency (period: 1 min) , 0.75 mm 0.030 in double amplitude in X, Y, and Z directions for 30 min. each
Environmental resistance : Shock resistance 196 m/s2 acceleration (20G approx.) in X, Y, and Z directions three times each
Material Enclosure: Aluminum
Weight 300 g approx.
Accessory HL-D3 set-up CD-ROM, (including HL-D3SMI and User's Manual), Instruction manual, USB cable (2 m 6.562 ft)

Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region



Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)