Business > Industrial Devices > Automation Controls Top > Components & Devices > Connectors > Narrow Pitch RF Connectors > RF35(0.35mm pitch) > Rating/Performance
For 5 G Millimeter-wave Antenna Modules. 15 GHz with 5 G specifications.
|
Item | Specifications | Conditions | |
---|---|---|---|
Electrical characteristics |
Rated current | Max. 0.3 A / pin contact x 8 pin contacts (signal contact) | |
Max. 1.0 A / pin contact x 2 pin contacts (power contact) | |||
Rated voltage | 30 V AC, DC | ||
Dielectric strength | 150 V AC for 1 min | Detection current: 1 mA | |
Insulation resistance | Min. 1,000 MΩ (Initial stage) | Using 250 V DC megger (applied for 1 min) | |
Contact resistance | Max. 90 mΩ | According to the method of JIS C 5402 (Current: 1 mA) | |
Insertion loss | DC to 10 GHz: Max. 0.30 dB 10 to 15 GHz: Max. 0.50 dB |
||
Isolation | DC to 10 GHz: Min. 45 dB 10 to 15 GHz: Min. 35 dB |
||
V. S. W. R | DC to 3 GHz: Max. 1.2 3 to 6 GHz: Max. 1.4 6 to 12 GHz: Max. 1.5 12 to 15 GHz: Max. 2.0 |
||
Characteristic impedance |
50±5 Ω | ||
Mechanical characteristics |
Composite insertion force | Max. 40 N (Initial stage) | |
Composite removal force | Min. 2.0 N (Initial stage) | ||
Environmental characteristics |
Ambient temperature | -50 to +85°C | No icing or condensation |
Ambient temperature Soldering heat resistance | The initial specificaton must be satisfied electrically and mechanically | Max. peak temperature of 260 °C Infrared reflow soldering (PC board surface temperature near connector terminals) | |
Storage temperature | -55 to +85°C (Products only) -40 to +50°C (Packaging structure) |
No icing or condensation | |
Thermal shock resistance (header and socket mated) | After 5 cycles, Insulation resistance: Min. 100 MΩ, Contact resistance: Max. 90 mΩ |
||
Humidity resistance (header and socket mated) |
After 120 hours, Insulation resistance: Min.100 MΩ, Contact resistance: Max. 90 mΩ |
IEC60068-2-78 Temperature: 40±2°C Humidity: 90 to 95% RH |
|
Saltwater spray resistance (header and socket mated) |
After 24 hours, Insulation resistance: Min. 100 MΩ, Contact resistance: Max. 90 mΩ |
IEC60068-2-11 Temperature: 35±2°C saltwater concentration: 5±1% |
|
H2S resistance (header and socket mated) |
After 48 hours, Contact resistance: Max. 90 mΩ |
Temperature: 40±2°C Gas concentration: 3±1 ppm Humidity: 75 to 80% RH |
|
Lifetime characteristics | Insertion and removal life | Mechanical life: 10 times Contact resistance: Max. 90 mΩ Composite removal force: Min. 2.0 N |
Repeated insertion and removal cycles of max. 200 times / hour |
Unit weight | 10 contacts Soket: 0.009 g Header: 0.005 g |
Part name | Material | Surface treatment |
---|---|---|
Molded portion | LCP resin (UL94V-0) | - |
Contact and Post | Copper alloy | Contact portion (main): Au plating, over nickel Contact portion (Sub): Au plating, over nickel Terminal portion: Au plating, over nickel (except for top of the terminal) Ground terminal: Au plating, over nickel (except for top of the terminal) |
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)