[System Maintenance Notice]
Due to ongoing system maintenance, the site search and specification search functions are temporarily unavailable. We apologize for any inconvenience this may cause and appreciate your understanding.

Business > Industrial Devices > Automation Controls Top > Components & Devices > Relays / Couplers > Power Relays (Over 2A) > Power Relays (Over 2A) Lineup > HE-A Relays > Rating/Performance

HE-A Relays

Lineup
- DE Relays Compliant with European safety standards, 1 Form A/2 Form A/1 Form A 1 Form B 10 A/8 A Polarized power relays
- DJ Relays High insulation, 1-pole/2-pole 16 A, Polarized power relays
- DJ-H Relays Suitable for lighting and motor load, 1 Form A 50 A, Latching relays
- DK Relays 1 Form A 10 A, 1 Form A 1 Form B/2 Form A 8 A, Small polarized power relays
- DS Power Relays 1 Form A 8 A (AC) / 5 A (DC) , 1 Form A 1 Form B/2 Form A 5 A (AC/DC) , Small polarized power relays
- DW Relays 1 Form A 8 A/16 A, Small, Polarized power relays (latching type)
- DY Relays 1 Form A 10 A, 1 Form A 1 Form B 8 A, Small polarized power relays
- DZ-S Relays IEC62055-31 UC3 compliant, 1 Form A 90 A, Power latching relays
- HE Relays TV-10/TV-15 rated, 1 Form A 30 A, 2 Form A 25 A, Power relays
- HE Relays PV Type Compact size, 1 Form A 35 A/48 A/90 A Power relays for solar inverter
- HE-N Relays High capacity 120 A　490 V AC 1 Form A power relay
- HE-S Relays Compact size 2a and 2a1b 40 A power relays for energy management and industrial equipment
- HE-R Relays Compact size 2 Form A and 2 Form A 1Form B 80 A/4 Form A and 4 Form A and 1 Form B 40 A power relays
- JV-N Relays 1 Form A 16 A, low profile: 10.9 mm power relays for heater control
- JW Relays 1 Form A/1 Form C/2 Form A/2 Form C, 5 A/10 A, Power relays
- LD-P Relays Compliant with IEC/EN60335-1/ EN60079-15 (VDE approved) 1 Form A 5 A Slim power relays
- LF Relays Ideal for compressor and inverter loads, 1 Form A 20 A, Power relays
- LF-G Relays Load for solar inverter, Compact size, 1 Form A 22 A/33 A, Power relays
- LQ Relays Compliant with IEC/EN60335-1^*1^*2 /EN60079-15^*3 1 Form A/1 Form C 10 A small power relays
- LZ Relays Low profile: 15.7 mm, 1 Form A/1 Form C 16 A, Power relay
- LZ-N Relays EN60335-1 GWT compliant, 15.7 mm Low profile, 1 Form A/1 Form C 16 A, Power relays
- NC Relays Transistor drive, 2 Form C/4 Form C, 5 A Slim power relays
- PA-N Relays Complies with IEC61010 reinforced insulation, For PLC/Interface, 1 Form A 5 A, Slim power relay
- PF Relays Compliant with European standards, 1 Form A/1 Form C 6 A, Slim power relays
- S Relays 2 Form A 2 Form B/3 Form A 1 Form B/4 Form A /4 A Polarized power relays
- SP Relays 2 Form C 15 A, 4 Form C 10 A, Polarized power relays
- ST Relays 1 Form A 1 Form B/2 Form A, 8 A, Polarized power relays
- HE-A Relays Compact size 1 Form A /１ Form A 1 Form B 110 A power relays for PV inverter, Charging station and Industrial equipment
CAD data　 Catalogs/Datasheets　　
FAQ

Click here for information on compliance with standards

Basic Information

Part Number

Rating/Performance

Dimensions

Coil data

Operating characteristics such as "Operate voltage" and "Release voltage" are influenced by mounting conditions or ambient temperature, etc.
Therefore, please use the relay within ±5 % of rated coil voltage.
"Initial" means the condition of products at the time of delivery.

Rated coil voltage	Operate voltage^*1 (at 20°C)	Release voltage^*1 (at 20°C)	Rated operating current (±10%, at 20°C)	Coil resistance (±10%, at 20°C)	Rated operating power (at 20°C)	Max. allowable voltage (at 55°C)
12 V DC	Max. 75% V of rated coil voltage (Initial)	Max. 5% V of rated coil voltage (Initial)	160 mA	75 Ω	1,920 mW Holding^2: 310 mW^3	110% V of rated coil voltage
24 V DC	Max. 75% V of rated coil voltage (Initial)	Max. 5% V of rated coil voltage (Initial)	80 mA	300 Ω	1,920 mW Holding^2: 310 mW^3	110% V of rated coil voltage

*1	Square, pulse drive
*2	When using with the holding voltage, switch to the holding voltage after 100 ms from the application of the coil rated voltage.
*3	With 40% V coil holding voltage

Return to top

Specifications

Item			Specifications
Contact data	Form A contact	Contact arrangement	1 Form A, 1 Form A 1 Form B
		Contact resistance (initial)	Max. 10 mΩ (by voltage drop 20 A 6 V DC)
		Contact material	AgNi type
		Contact rating (inductive)	90 A 277 V AC cosφ = 0.8
		Contact rating (resistive)	60 A 490 V AC, 55 A 800 V AC, 90 A 60 V DC
		Max. switching power (resistive)	44,000 VA, 5,400 W
		Max. switching voltage (resistive)	800 V AC, 60 V DC
		Max. switching current (inductive)	90 A
		Max. carrying current	110 A
		Min. switching load (reference value)^*1	100 mA 5 V DC
	Form B contact (1a1b type only)	Contact arrangement	1 Form A 1 Form B
		Contact resistance (initial)	Max. 100 mΩ (by voltage drop 1 A 6 V DC)
		Contact material	Au flashed AgNi type
		Contact rating (resistive)	1 A 30 V DC
		Max. switching power (resistive)	30 W
		Max. switching voltage (resistive)	30 V DC
		Max. switching current (resistive)	1 A
		Min. switching load (reference value)^*1	10 mA 5 V DC
Insulation resistance (initial)			Min. 1,000 MΩ (at 500 V DC, Measured portion is the same as the case of dielectric strength)
Dielectric strength (initial)		Between open Form A contacts	2,000 Vrms for 1 min (detection current: 10 mA)
		Between Form A contact and coil	5,000 Vrms for 1 min (detection current: 10 mA)
		Between open Form B contacts	1,000 Vrms for 1 min (detection current: 10 mA)
		Between Form B contact and coil	2,000 Vrms for 1 min (detection current: 10 mA)
		Between Form A contact and Form B contact	5,000 Vrms for 1 min (detection current: 10 mA)
Surge withstand voltage (initial)^*2		Between Form A contact and coil	10,000 V
Surge withstand voltage (initial)^*2		Between Form B contact and coil	2,500 V
Coil holding voltage^*3			40 to 110% V (at -40 to +55°C) 40 to 60% V (at +55 to +85 ℃)
Time characteristics (initial)		Operate time	Max. 30 ms (at rated coil voltage, at 20°C, without bounce)
Time characteristics (initial)		Release time^*4	Max. 10 ms (at rated coil voltage, at 20°C, without bounce, without diode)
Shock resistance		Functional	98 m/s² (half-sine shock pulse: 11 ms, detection time: 10 μs)
Shock resistance		Destructive	980 m/s² (half-sine shock pulse: 6 ms)
Vibration resistance		Functional	10 to 55 Hz (at double amplitude of 1.0 mm, detection time: 10 μs)
Vibration resistance		Destructive	10 to 55 Hz (at double amplitude of 1.5 mm)
Expected life		Mechanical life	Min. 10⁶ ope. (switching frequency: at 180 times/min)
Conditions		Conditions for usage, transport and storage	Ambient temperature: -40 to +55°C (When applied coil hold voltage is 40 to 110% V of rated coil voltage.) -40 to +85°C (When applied coil hold voltage is 40 to 60% V of rated coil voltage or transport and storage.) Humidity: 5 to 85% RH (Avoid icing and condensation)
Unit weight			Approx. 80 g

*1	This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load.
*2	Wave is standard shock voltage of ±1.2 x 50 µs according to JEC-212-1981
*3	Coil holding voltage is the coil voltage after 100 ms from the applied rated coil voltage.
*4	Release time will lengthen if a diode, etc., is connected in parallel to the coil. Be sure to verify operation under actual conditions.

Return to top

Expected electrical life

Type	Load	Switching capacity	Number of operations
Form A contact	Inductive load	90 A 277 V AC cosφ = 0.8	Min. 10³ ope. (ON:OFF = 1s:9s, at 85°C)
	Resistive load	60 A 490 V AC	Min. 10 x 10³ ope. (ON:OFF = 1s:9s)
		55 A 800 V AC	Min. 10³ ope. (ON:OFF = 1s:9s)
		40 A 600 V AC	Min. 50 x 10³ ope. (ON:OFF = 1s:9s, at 85°C)
		30 A 800 V AC	Min. 50 x 10³ ope. (ON:OFF = 1s:9s, at 85°C)
		90 A 60 V DC	Min. 10 x 10³ ope. (ON:OFF = 1s:9s, at 85°C)
Form B contact (1 Form A 1 Form B type only)	Resistive load	1 A 30 V DC	Min. 100 x 10³ ope. (ON:OFF = 1s:9s)