AUTOMATION
CONTROLS

Search
Discontinued
Products



FAYb Laser Marker LP-RF

A New Option : "Simplicity"

FDA GB

FDA , GB Approved
GB : Conforming to 7247.1

Features

Pulse oscillation fiber laser marker (FAYb laser)
What is FAYb laser?

In a revolutionary method, the FAYb laser amplifies a weak laser beam from a master oscillator as it passes through a fiber treated with the element ytterbium to emit a strong laser beam.

Long life and high reliability
The LD contains reliable and durable InGaAs (gallium indium arsenide). Since the LD lights only during marking, the heat load remains minimal and the product provides a long life.
High efficiency and energy saving
Because laser amplification takes place inside the fiber containing ytterbium, high beam-to-beam conversion efficiency of approximately 50 % is achieved.
Compact head
The amplification section is contained inside the oscillator unlike solid lasers such as YVO4, so the head is compact and contributes to the reduction of equipment size.

What is FAYb laser?

Compact fan-less head with IP64 rating

The head was developed based on the fan-less head equipped in the LP-M series, so it is tough. There will be no entry of water drop and dust particles to cause problems.

No more cumbersome installation work
Removable head

With a conventional model, the head cannot be separated from the controller.
Therefore, installation or maintenance work requires the handling of the head that weighs more than 10 kg. The LP-RF series features a removable head, thus allowing the installation of the controller and head individually. This contributes to the reduction of man-hours required for installation and maintenance.

Removable head

Measure against power supply noise

Electrical noise produced by equipment using a large amount of electrical current or generated in the surrounding area can affect the operation of the internal parts of the equipment and causes problems. Therefore, UPSs (uninterruptible power supply units) are installed to equipment in many production facilities as a measure against power supply noise. The laser marker controller of the LP-RF series is equipped with anti-noise parts such as a power transformer and varistor to ensure safe and reliable use of the laser marker on the production floor. This protects the internal parts of the laser marker from electrical noise and prevents problems caused by noise.

Measure against power supply noise

Direct linkage with image processing device
Automatic marking position correction and scan check

The LP-RF series can be connected directly to the PV230 series machine vision system.
This enables the execution of a series of operations, such as detection of the position of approximately placed workpiece, correction of the laser irradiation position, laser marking, and cross-checking of scanned information of marked QR code, etc., without using a PLC.

Automatic marking position correction

Automatic marking position correction
The PV230 scans and detects the position of the workpiece placed in the equipment.

Laser marking

Laser marking
The angle is corrected based on the scanned position information before the LP-RF irradiates laser beam.

Cross-check of scanned code information

Cross-check of scanned code information
Whether the marked 2D code can be scanned properly is checked, and the scanned information is crosschecked with the marking data.

Safety consideration
Duplicate interlock circuit

The interlock circuit using a contactor features a duplicate configuration. It reliably shuts off the laser power source unit in the event an abnormality occurs. In addition, the LP-RF series is complete with safety features such as the broken line notification function and erroneous irradiation detection function.

Duplicate interlock circuit

Laser marking of design image in a simple way
Laser Marker NAVI Smart

The new "Laser Marker NAVI Smart" software, which was supplied with the LP-GS CO2 laser marker and highly acclaimed, is provided with the product. Using the software, characters and logo marks and 2D code can be set and arranged on a PC or tablet. The screen layout can be customized to suit each work environment. The screen can be switched according to the purpose of use, such as for parameter setting or for workers.

Laser Marker NAVI Smart

Simple 3-step setting

(1)Arrange the characters and figures to be marked.

(1)Arrange the characters and figures to be marked.

(2)Set the laser irradiation condition.

(2)Set the laser irradiation condition.

(3)Irradiate the laser beam using the test marking function.

(3)Irradiate the laser beam using the test marking function.

Navigation for attaining optimal marking result
Smart condition setting function

Smart condition setting function

The one-touch function is packed with our extensive know-how of laser marking parameters such as laser power, scan speed and pulse oscillation frequency. The user can select a desired marking result from 16 types of material and image.

Iron, stainless steel
(shallow engraving)

Iron, stainless steel (shallow engraving)

Aluminum
(deep engraving)

Aluminum (deep engraving)

PC
(white)

PC (white)

Iron, stainless steel
(deep engraving)

Iron, stainless steel (deep engraving)

ABS
(white)

ABS (white)

PP
(black)

PP (black)

AI data conversion plug-in

AI data conversion plug-in

*Installation of Adobe® Illustrator® (for Windows) is required for the use of the plug-in.
Regarding the supported versions of Adobe® Illustrator®, contact our company.

The supplied plug-in software converts AI data prepared with Adobe® Illustrator®* to marking data for use by the laser marker. This lets the user to flexibly design the characters to be marked.

Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE SEARCH FAQ

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE

FAQ