【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Pressure Sensors / Flow Sensors > Pressure Sensors / Flow Sensors > Digital Pressure Sensor [For Gas] DP-0 > Specifications
|
Type | Low pressure | High pressure | |
---|---|---|---|
Model No. |
NPN output | DP-001 | DP-002 |
PNP output | DP-001-P | DP-002-P | |
Applicable regulations and certifications | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) | ||
Type of pressure | Gauge pressure | ||
Rated pressure range | -100.0 to +100.0 kPa | 0.000 to +1.000 MPa | |
Set pressure range | -101.0 to +101.0 kPa -1.030 to +1.030 kgf/cm2 -1.010 to + 1.010 bar -14.65 to +14.65 psi -756 to +756 mmHg |
-0.010 to +1.010 MPa -0.1 to +10.30 kgf/cm2 -0.1 to + 10.10 bar -0.1 to +146.5 psi |
|
Pressure withstandability | 500 kPa | 1.5 MPa | |
Applicable fluid | Air, non-corrosive gas | ||
Selectable unit | Low pressure type: kPa, kgf/cm2, bar, psi, mmHg High pressure type: MPa, kgf/cm2, bar, psi |
||
Supply voltage | 12 to 24 V DC ±10 % Ripple P-P 10 % or less | ||
Power consumption | 30 mA or less | ||
Comparative output | <NPN output type> NPN open-collector transistor • Maximum sink current: 50 mA • Applied voltage: 30 V DC or less (between comparative output and 0 V) • Residual voltage: 2 V or less (at 50 mA sink current) <PNP output type> PNP open-collector transistor • Maximum source current: 50 mA • Applied voltage: 30 V DC or less (between comparative output and +V) • Residual voltage: 2 V or less (at 50 mA source current) |
||
Output operation | Selectable either NO or NC by key operation | ||
Hysteresis | Minimum 2 digits (variable) | ||
Repeatability | ±0.2 % F.S. (within ±4 digits) | ±0.4 % F.S. (within ±4 digits) | |
Response time | 2.5 ms, 25 ms, 250 ms, selectable by key operation | ||
Short-circuit protection | Incorporated | ||
Display | 3 + 1/2 digits, 3-color (white / red / pink) LCD display (Display update period: 250 ms) | ||
Displayable pressure range |
-101.0 to +101.0 kPa -1.030 to +1.030 kgf/cm2 -1.010 to + 1.010 bar -14.65 to +14.65 psi -756 to +756 mmHg |
-0.010 to +1.010 MPa -0.1 to +10.30 kgf/cm2 -0.1 to + 10.10 bar -0.1 to +146.5 psi |
|
Environmental resistance |
Protection | IP40 (IEC) | |
Ambient temperature | 0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), Storage: -10 to +60 ℃ +14 to +140 ℉ | ||
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | ||
Voltage withstandability | 500 V AC for one min. between all supply terminals connected together and enclosure | ||
Insulation resistance | 50 MΩ or more with 500 V DC megger between all supply terminals connected together and enclosure | ||
Vibration resistance | 10 to 150 Hz frequency, 0.75 mm double amplitude 0.030 in or maximum acceleration 49 m/s2, in X, Y and Z directions for two hours each | ||
Shock resistance | 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each | ||
Pollution degree | 2 | ||
Overvoltage category | I | ||
Usable altitude | 2,000 m 6,562 ft or less | ||
Temperature characteristics (+20℃ standard) |
+10 to +40℃ +50 to +104 ℉: Within ±1 % F.S. 0 to +50℃ 32 to +122℉: Within ±2.5 % F.S. |
+10 to +40℃ +50 to +104℉: Within ±2 % F.S. 0 to +50℃ 32 to +122℉: Within ±5 % F.S. |
|
Grounding method | Floating | ||
Pressure port | M5 female thread | ||
Material | Enclosure: PBT (glass fiber reinforced), LCD display: Acrylic, Pressure port: Brass (nickel plated), Mounting threaded part: Brass, O-ring: Nitrile rubber (NBR), Key section: Polycarbonate |
||
Weight | 25 g approx. | ||
Accessory | CN-14A-C2 (Connector attached cable 2 m 6.562 ft): 1 pc. |
Note: | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉. |
---|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)