【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.

AUTOMATION
CONTROLS

Search
Discontinued
Products



High-performance Digital Pressure Sensor DP2 (Discontinued Products)

We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.

Last time buy September 30, 2015
 
Specifications

Specifications

Type Vacuum pressure
-101 kPa type
Standard Light weight Flat IP67
Model No. Asia DP2-20 DP2-80 - DP2-60
North America (Note 2) DP2-20F(-P) - DP2-40N DP2-60N
Europe - - DP2-40E DP2-60E
Type of pressure Gauge pressure
Rated pressure range 0 to -101.3 kPa
Set pressure range 5.1 to -101.3 kPa
Pressure withstandability 490 kPa
Applicable fluid Non-corrosive gas
Selectable units kPa, kgf/cm2, bar, psi, mmHg, inHg
Supply voltage 12 to 24 V DC +10 /-15 % Ripple P-P 10 % or less
Current consumption 50 mA or less
Comparative outputs
(Comparative Output 1
Comparative Output 2)		 <Asia, North America (Standard NPN output, flat and IP67 types)>
NPN open-collector transistor
・Maximum sink current: 100 mA
<North America (Standard PNP output type), Europe>
PNP open-collector transistor
・Maximum source current: 100 mA
  Output modes Equipped with 4 types of modes: hysteresis mode, window comparator mode, dual output mode, automatic sensitivity setting mode (selectable by key operation)
Response time 2.5 ms or less
Analog voltage output Output voltage: 1 to 5 V (over rated pressure range),
Zero-point: within 1 V ± 5 % F.S.
Span: within 4 V ± 5 % F.S., Linearity: within ±1 % F.S.,
Output impedance: 1 kΩ approx.
Display 3 1/2 digit red LED display (Sampling rate: 4 times/sec. approx.)
  Displayable pressure range 5.1 to -101.3 kPa
Analog bar display LED bar display in steps of 10 % F.S. approx.
Protection Standard, Flat and Light weight types: IP40 (IEC),
IP67 type: IP67 (IEC)
Ambient temperature -10 to +50 ℃ +14 to +122 ℉ (No dew condensation or icing allowed),
Storage: -10 to +60 ℃ +14 to +140 ℉
Pressure
port		 Asia Standard, Flat and IP67 types: Rc (PT) 1/8 female thread,
Light weight type: M5 female thread
North America Standard type: NPTF 1/8 female thread,
Flat and IP67 types: NPT 1/8 female thread
Europe Flat and IP67 types: G (PF) 1/8 female thread
Material Front case: ABS, Rear case: PPS (glass fi ber reinforced), Display surface: Acrylic
Pressure port attachment: Die-cast zinc alloy [Light weight type: POM (glass fi ber reinforced), pressure port is brass (nickel plated)]
Front cover (IP67 type only): Polycarbonate
Net weight Standard type: 95 g approx., Flat type: 120 g approx.,
IP67 type: 370 g approx., Light weight type: 70 g approx.
Dimensions DP2-20□
: W31.6 x H31.6 x D38.5 mm W1.244 x H1.244 x D1.516 in
DP2-40□
: W30 x H44.7 x D35 mm W1.181 x H1.760 x D1.378 in
DP2-60□
: W46 x H69.5 x D43 mm W1.811 x H2.736 x D1.693 in
DP2-80□
: W30 x H41 x D33.5 mm W1.181 x H1.614 x D1.319 in
Accessories DPX-02 (Hexagon-socket-head plug for pressure port): 1 pc.
(Standard type only), Pressure unit label: 1 pc.
Type Positive pressure
100 kPa type 1 MPa type
Standard Flat IP67 Standard Flat IP67
Model No. Asia DP2-21 DP2-41 DP2-61 DP2-22 DP2-42 DP2-62
North America (Note 2) DP2-21F(-P) DP2-41N DP2-61N DP2-22F(-P) DP2-42N DP2-62N
Europe - DP2-41E DP2-61E - DP2-42E DP2-62E
Type of pressure Gauge pressure
Rated pressure range 0 to 100.0 kPa 0 to 1.000 MPa
Set pressure range -5.0 to 100.0 kPa -0.050 to 1.000 MPa
Pressure withstandability 490 kPa 1.47 MPa
Applicable fluid Non-corrosive gas
Selectable units kPa, kgf/cm2, bar, psi MPa, kgf/cm2, bar, psi
Supply voltage / Current consumption 12 to 24 V DC +10 /-15 % Ripple P-P 10 % or less / 50 mA or less
Comparative outputs
(Comparative Output 1
Comparative Output 2)		 <Asia, North America (Standard NPN output, flat and IP67 types)>
NPN open-collector transistor
・Maximum sink current: 100 mA
<North America (Standard PNP output type), Europe>
PNP open-collector transistor
・Maximum source current: 100 mA
  Output modes Equipped with 4 types of modes: hysteresis mode, window comparator mode, dual output mode, automatic sensitivity setting mode (selectable by key operation)
Response time 2.5 ms or less
Analog voltage output Output voltage: 1 to 5 V (over rated pressure range),
Zero-point: within 1 V ± 5 % F.S.
Span: within 4 V ± 5 % F.S., Linearity: within ±1 % F.S.,
Output impedance: 1 kΩ approx.
Display 3 1/2 digit red LED display (Sampling rate: 4 times/sec. approx.)
  Displayable pressure range -5.0 to 100.0 kPa -0.050 to 1.000 MPa
Analog bar display LED bar display in steps of 10 % F.S. approx.
Protection Standard, Flat and Light weight types: IP40 (IEC),
IP67 type: IP67 (IEC)
Ambient temperature -10 to +50 ℃ +14 to +122 ℉ (No dew condensation or icing allowed),
Storage: -10 to +60 ℃ +14 to +140 ℉
Pressure
port		 Asia Standard, Flat and IP67 types: Rc (PT) 1/8 female thread,
Light weight type: M5 female thread
North America Standard type: NPTF 1/8 female thread,
Flat and IP67 types: NPT 1/8 female thread
Europe Flat and IP67 types: G (PF) 1/8 female thread
Material Front case: ABS, Rear case: PPS (glass fi ber reinforced), Display surface: Acrylic
Pressure port attachment: Die-cast zinc alloy [Light weight type: POM (glass fi ber reinforced), pressure port is brass (nickel plated)]
Front cover (IP67 type only): Polycarbonate
Net weight Standard type: 95 g approx., Flat type: 120 g approx.,
IP67 type: 370 g approx., Light weight type: 70 g approx.
Dimensions DP2-21□ / DP2-22□
: W31.6 x H31.6 x D38.5 mm W1.244 x H1.244 x D1.516 in
DP2-41□ / DP2-42□
: W30 x H44.7 x D35 mm W1.181 x H1.760 x D1.378 in
DP2-61□ / DP2-62□
: W46 x H69.5 x D43 mm W1.811 x H2.736 x D1.693 in
Accessories DPX-02 (Hexagon-socket-head plug for pressure port): 1 pc.
(Standard type only), Pressure unit label: 1 pc.

Note 1 :Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉.
Note 2 :Model Nos. of North America standard type having the suffix "-P" are PNP output type.

Return to top

Specifications
CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE
Related Information
Service & Support

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)