【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Sensor Options > ON / OFF Input Sensor Controller NPS(Discontinued Products) > Specifications
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
Type | DIN rail mounting | |||
---|---|---|---|---|
General use | High-performance | Two sensor connection | ||
Model No. | NPS-C7 | NPS-CT7 | NPS-C7W | |
Applicable sensors | Photoelectric sensor, inductive proximity sensor, etc., with NPN transistor output or relay output | |||
Supply voltage | 100 to 240 V AC ± 10 % | |||
Power consumption | 6 VA or less | |||
Power supply for sensor |
Voltage | 12 V DC ± 10 % (incorporated with short-circuit protection) | ||
Current | 150 mA max. | 130 mA max. | 120 mA max. | |
Output | Relay contact 1c ・Switching capacity: 250 V 3 A AC (resistive load) ・Electrical life: 100,000 switching operations or more (rated load)(at 1,800 operations/hour) ・Mechanical life: 10 million switching operations or more (at 36,000 operations/hour) NPN open-collector transistor ・Maximum sink current: 100 mA or less ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current) |
Relay contact 1c x2 ・Switching capacity: 250 V 3 A AC (resistive load) ・Electrical life: 100,000 switching operations or more (rated load)(at 1,800 operations/hour) ・Mechanical life: 10 million switching operations or more (at 36,000 operations/hour) |
||
Output operation | Switchable normal operation or inverse operation | |||
Response time | Relay contact: 10 ms approx., NPN open-collector transistor: 5 μs or less | 10 ms approx. | ||
Indicators | Power | Red LED (lights up when the power is ON) | ||
Output (Note 2) | Red LED (lights up when the output is ON) | |||
Sensor signal input | - | Red LED (lights up when the sensor signal input is effective) |
- | |
External synchronization input |
- | Red LED (lights up when the external synchronization input is effective) |
- | |
External synchronization function | Gate trigger | Gate trigger and edge trigger | - | |
Timer function | - | Three function selectable timer (Timer period: switchable either 40 ms to 1 sec. or 0.4 sec. to 10 sec.) |
- | |
Ambient temperature | -10 to +50 ℃ +14 to +122 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉ | |||
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | |||
Voltage withstandability | 1,500 V AC for one min. between the power and the output terminals | |||
Insulation resistance | 10 MΩ, or more, with 500 V DC megger between the power and the output terminals | |||
Vibration resistance | 10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each | |||
Shock resistance | 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions two times each | |||
Material | Enclosure: ABS, Terminal block: PBT (Glass fiber reinforced) | |||
Connecting method | Terminal block | |||
Weight | Net weight: 160 g approx. | |||
Accessories | Short bar: 1 pc., NPS-CV (Protection cover): 1 pc., Short-circuit protection plate: 1 pc., Adjusting screwdriver: 1 pc. (NPS-CT7 only) |
Notes:
1) | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃ +68 ℉. |
---|---|
2) | In NPS-C7W, two output indicators, Sensor 1 output indicator and Sensor 2 output indicator, have been incorporated. |
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)