【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.

Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Fiber Sensors > Digital Fiber Sensor FX-550 > Order guide

Digital Fiber Sensor FX-550

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

Order guide

Sensing characteristics

List of fibers

Cautions For Use

Order guide

Amplifiers

Quick-connection cable is not supplied with FX-551(P). Please order it separately.

Type	Model No.	Emitting element	Output
Connector type	FX-551	Red LED	NPN open-collector transistor
Connector type	FX-551P		PNP open-collector transistor
Cable type	FX-551-C2		NPN open-collector transistor
Cable type	FX-551P-C2		PNP open-collector transistor

Quick-connection cables

Quick-connection cable is not supplied with the connector type amplifier. Please order it separately.

Type	Model No.	Description
Main cable (3-core)	CN-73-C1	Length: 1 m 3.281 ft	0.2 mm² 3-core cabtyre cable, with connector on one end Cable outer diameter: ø3.3 mm ø0.130 in
	CN-73-C2	Length: 2 m 6.562 ft
	CN-73-C5	Length: 5 m 16.404 ft
Sub cable (1-core)	CN-71-C1	Length: 1 m 3.281 ft	0.2 mm² 1-core cabtyre cable, with connector on one end Cable outer diameter: ø3.3 mm ø0.130 in Connectable to a main cable up to 15 cables.
	CN-71-C2	Length: 2 m 6.562 ft
	CN-71-C5	Length: 5 m 16.404 ft

Main cable

CN-73-C□

Sub cable

CN-71-C□

End plates

End plates are not supplied with the amplifier. Please order them separately when the amplifiers are mounted in cascade.

Appearance	Model No.	Description
	MS-DIN-E	When cascading multiple amplifiers, or when it moves depending on the way it is installed on a DIN rail, these end plates clamp amplifiers into place on both sides. Make sure to use end plates when cascading multiple amplifiers together. [2 pcs. per set]