【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Fiber Sensors > High-speed / LED Sensing Fiber Sensor FX2 > Specifications
Discontinuation plan
|
|
Type | High-speed type | LED sensing type | |
Model No. | FX2-A3R | FX2-A3R-LED | |
Supply voltage | 12 V DC ± 10 % Ripple P-P 10 % or less | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | |
Power consumption | 55 mA or less | 20 mA or less | |
Output | NPN transistor universal ・Maximum sink current: 100 mA ・Residual voltage: 1.0 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current) | ||
Output operation | Selectable either Light-ON or Dark-ON, by the control input | ||
Response time | In light state: 15 μs or less, In dark state: 35 μs or less | In light state: 50 ms or less, In dark state: 100 ms or less | |
Operation indicator | Red LED (lights up when the output is ON) | ||
Sensitivity adjuster | 3-turn endless potentiometer | ||
Protection | IP66 (IEC) (Note 2) | IP62 (IEC) | |
Ambient temperature | -10 to +50 ℃ -14 to +122 ℉ (FX2-A3R-LED: 0 to +50℃ +32 to +122 ℉) (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉ |
||
Ambient illuminance | 500 lx | - | |
Emitting / Receiving element | Emitting element: Red LED (Peak emission wavelength: 660 nm 0.026 mil, non-modulation) |
Receiving element: Photodiode (Peak wavelength: 590 nm 0.023 mil) |
|
Material | Polycarbonate | ||
Weight | Net weight: 120 g approx. | ||
Dimensions | W14 x H30 x D56 mm W0.551 x H1.181 x D2.205 in | ||
Accessories | MS-FX-1 (Amplifier mounting bracket): 1 set, Adjusting screwdriver: 1 pc., Adjusting knob: 1 pc. |
Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2) This is the value when the combination fiber has been attached. However, the value is IP65 when combined with the free-cut type fiber.
3) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
|
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)