【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Micro Photoelectric Sensors > Convergent Reflective Micro Photoelectric Sensor PM2 > Specifications
|
Type | Connector type | |||
---|---|---|---|---|
Top sensing | Front sensing | L type (Top sensing) |
||
Model No. | Light-ON | PM2-LH10 | PM2-LF10 | PM2-LL10 |
Dark-ON | PM2-LH10B | PM2-LF10B | PM2-LL10B | |
CE marking directive compliance | EMC Directive, RoHS Directive | |||
Sensing range | 2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 x 15 mm 0.591 in x 0.591 in) (Note 2) | |||
Min. sensing object | ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in) | |||
Hysteresis | 20 % or less of operation distance with white non-glossy paper (15 x 15 mm 0.591 x 0.591 in) | |||
Repeatability (perpendicular to sensing axis) |
0.08 mm 0.003 in or less (Note 3) | |||
Supply voltage | 5 to 24 V DC ±10 % Ripple P-P 5 % or less | |||
Current consumption | Average: 25 mA or less, Peak: 80 mA or less | |||
Output | NPN open-collector transistor • Maximum sink current: 100 mA • Applied voltage: 30 V DC or less (between output and 0 V) • Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) |
|||
Utilization category | DC-12 or DC-13 | |||
Overcurrent operation |
Incorporated | |||
Response time | 0.8 ms or less | |||
Operation indicator | Red LED (lights up when the output is ON) | |||
Pollution degree | 3 (Industrial environment) | |||
Ambient temperature | –10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +80 ℃ –13 to +176 ℉ |
|||
Ambient humidity | 45 to 85 % RH, Storage: 45 to 85 % RH | |||
Ambient illuminance | Incandescent light: 3,500 lx or less at the light-receiving face | |||
Vibration resistance | 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each | |||
Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | |||
Emitting element | Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated) | |||
Material | Enclosure: Polycarbonate, Terminal part: Copper alloy (Ag plated) | |||
Cable | - | |||
Wiring length | Total length up to 2 m 6.562 ft is possible with 0.3 mm2, or more, cable. (If the cable is extended for 2 m 6.562 ft, or more, a capacitor of 10 µF must be connected between +V and 0 V terminals.) |
|||
Weight | Net weight: 4.5 g approx. Gross weight: 85 g approx. (10 pcs. package) |
Net weight: 4 g approx. Gross weight: 80 g approx. (10 pcs. package) |
Type | Cable type | |||
---|---|---|---|---|
Top sensing | Front sensing | L type (Top sensing) |
||
Model No. | Light-ON | PM2-LH10-C1 | PM2-LF10-C1 | PM2-LL10-C1 |
Dark-ON | PM2-LH10B-C1 | PM2-LF10B-C1 | PM2-LL10B-C1 | |
CE marking directive compliance | EMC Directive, RoHS Directive | |||
Sensing range | 2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 x 15 mm 0.591 in x 0.591 in) (Note 2) | |||
Min. sensing object | ø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in) | |||
Hysteresis | 20 % or less of operation distance with white non-glossy paper (15 x 15 mm 0.591 x 0.591 in) | |||
Repeatability (perpendicular to sensing axis) |
0.08 mm 0.003 in or less (Note 3) | |||
Supply voltage | 5 to 24 V DC ±10 % Ripple P-P 5 % or less | |||
Current consumption | Average: 25 mA or less, Peak: 80 mA or less | |||
Output | NPN open-collector transistor • Maximum sink current: 100 mA • Applied voltage: 30 V DC or less (between output and 0 V) • Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) |
|||
Utilization category | DC-12 or DC-13 | |||
Overcurrent protection |
Incorporated | |||
Response time | 0.8 ms or less | |||
Operation indicator | Red LED (lights up when the output is ON) | |||
Pollution degree | 3 (Industrial environment) | |||
Ambient temperature | –10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: –25 to +80 ℃ –13 to +176 ℉ |
|||
Ambient humidity | 45 to 85 % RH, Storage: 45 to 85 % RH | |||
Ambient illuminance | Incandescent light: 3,500 lx or less at the light-receiving face | |||
Vibration resistance | 10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each | |||
Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | |||
Emitting element | Infrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated) | |||
Material | Enclosure: Polycarbonate, Fixed cable part: PBT | |||
Cable | 0.2 mm2 3-core cabtyre cable, 1 m 3.281 ft long (Note 4) | |||
Wiring length | - | |||
Weight | Net weight: 25 g approx Gross weight: 330 g approx (10 pcs. package) |
Notes:
1): | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉. |
---|---|
2): | The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation. |
3): | The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in. |
4): | Cable cannot be extended. |
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)