【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Hot Melt Glue Detector TH (Discontinued Products)
We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.
|
September 30, 2017 |
|
|
I/O Circuit and Wiring diagrams
NPN output type
I/O circuit diagram
Controller / TH-C1, TH-C2 |
|
Note: The external synchronization input is active Low. |
|
*1 |
|
|
Specifying channel with external channel select inputs
Channel No. |
EXT.1 (Orange) |
EXT.2 (Pink) |
EXT.3 (Violet) |
1 |
L |
H |
H |
2 |
H |
L |
H |
3 |
L |
L |
H |
4 |
H |
H |
L |
5 |
L |
H |
L |
6 |
H |
L |
L |
7 |
L |
L |
L |
8 |
H |
H |
H |
L: Low (0 to 1 V), H: High (4.5 to 30 V, or open)
Notes:
1) |
The channel can be specified from the front panel only when all external channel select inputs (EXT.1, EXT.2, and EXT.3) are High (corresponding to Channel No. 8). |
2) |
The external channel select inputs take precedence over the front panel channel selection (except for Channel No. 8). |
3) |
If channel specification is changed from front panel operation to external channel select inputs and Channel No. 8 is to be selected by the external channel call inputs, make sure to specify a channel other than No. 8 before setting all the external channel select inputs (EXT.1, EXT.2, EXT.3) to High.
If this operation is not done, channel specification by front panel operation gets precedence. |
PNP output type
I/O circuit diagram
Controller / TH-C2P |
|
Note: The external synchronization input is active High. |
|
*1 |
|
|
*2 |
|
|
Specifying channel with external channel select inputs
Channel No. |
EXT.1 (Orange) |
EXT.2 (Pink) |
EXT.3 (Violet) |
1 |
L |
H |
H |
2 |
H |
L |
H |
3 |
L |
L |
H |
4 |
H |
H |
L |
5 |
L |
H |
L |
6 |
H |
L |
L |
7 |
L |
L |
L |
8 |
H |
H |
H |
L: Low (0 to 1 V), H: High (4.5 to 30 V, or open)
Notes:
1) |
The channel can be specified from the front panel only when all external channel select inputs (EXT.1, EXT.2, and EXT.3) are High (corresponding to Channel No. 8). |
2) |
The external channel select inputs take precedence over the front panel channel selection (except for Channel No. 8). |
3) |
If channel specification is changed from front panel operation to external channel select inputs and Channel No. 8 is to be selected by the external channel call inputs, make sure to specify a channel other than No. 8 before setting all the external channel select inputs (EXT.1, EXT.2, EXT.3) to High.
If this operation is not done, channel specification by front panel operation gets precedence. |
Return to top
Return to top