【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Ultra-slim Photoelectric Sensor EX-10 Ver.2
Sensing characteristics
EX-11□ EX-11E□ EX-15□ EX-15E□
Thru-beam type
Parallel deviation |
|
|
|
Angular deviation |
|
|
|
* |
Optical properties of side sensing types (EX-□E□) Due to the optical properties of side sensing types, note that sensing may be affected if multiple sensors are positioned in such a way that optical axes intersect as shown in the diagram below. |
|
Beam from Emitter 1 may be caught by Receiver 2. |
|
There is no problem when sensors are installed in parallel (although the distance between sensors should be ℓ × 2 or more). |
EX-13□ EX-13E□ EX-17□ EX-17E□
Thru-beam type
Parallel deviation |
|
|
|
Angular deviation |
|
|
|
Parallel deviation with slit masks (ø1.2 mm ø0.047 in) |
|
|
|
Parallel deviation with slit masks (ø1.5 mm ø0.059 in) |
|
|
|
EX-19□
Thru-beam type
Parallel deviation |
|
|
|
Angular deviation |
|
|
|
Parallel deviation with slit masks (ø1.2 mm ø0.047 in) |
|
|
|
Parallel deviation with slit masks (ø1.5 mm ø0.059 in) |
|
|
|
EX-19E□
Thru-beam type
Parallel deviation |
|
|
|
EX-14□
Convergent reflective type
Sensing fields |
|
|
|
|
Correlation between lightness and sensing range
|
The sensing region (typical) is represented by oblique lines in the left figure. However, the sensitivity should be set with enough margin because of slight variation in products.
(Lightness shown on the left may differ slightly from the actual object condition.) |
Correlation between material (50 × 50 mm 1.969 × 1.969 in) and sensing range
|
The bars in the graph indicate the sensing range (typical) for the respective material. However, there is a slight variation in the sensing range depending on the product. Further, if there is a reflective object (conveyor, etc.) in the background of the sensing object, since it affects the sensing, separate it by more than twice the sensing range shown in the left graph. |
Return to top
Return to top