【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Photoelectric Sensors / Laser Sensors > Amplifier built-in Ultra-slim Photoelectric Sensor EX-10S > Specifications
|
Type | Thru-beam | |||||
---|---|---|---|---|---|---|
Front sensing | Side sensing | Front sensing | Side sensing | Front sensing | ||
Model No. (Note 2) |
Light-ON | EX-11SA (-PN) |
EX-11SEA (-PN) |
EX-13SA (-PN) |
EX-13SEA (-PN) |
EX-19SA (-PN) |
Dark-ON | EX-11SB (-PN) |
EX-11SEB (-PN) |
EX-13SB (-PN) |
EX-13SEB (-PN) |
EX-19SB (-PN) |
|
Regulatory compliance | ・EMC Directive : EN 60947-5-2 ・RoHS Directive ・ISO 13849-1 (Category 1, PLc) (Note 3) |
|||||
Certification | UL certification | |||||
Sensing range | 150 mm 5.906 in | 500 mm 19.685 in | 1 m 3.281 ft | |||
Min. sensing object | ø0.5 mm ø0.020 in opaque object (Completely beam interrupted object) (Note 4) |
ø1.0 mm ø0.039 in opaque object (Completely beam interrupted object) (Note 4) |
ø2.0 mm ø0.079 in opaque object (Completely beam interrupted object) (Note 4) |
|||
Hysteresis | - | |||||
Repeatability (perpendicular to sensing axis) |
0.05 mm 0.002 in or less | |||||
Supply voltage | 12 to 24 V DC ± 10 % Ripple P-P 10 % or less | |||||
Current consumption | Emitter: 10 mA or less, Receiver: 10 mA or less | |||||
Output | <NPN output type> NPN open-collector transistor ・Maximum sink current: 50 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 2 V or less (at 50 mA sink current) 1 V or less (at 16 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 50 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 2 V or less (at 50 mA source current) 1 V or less (at 16 mA source current) |
|||||
Utilization category | DC-12 or DC-13 | |||||
Short-circuit protection | Incorporated | |||||
Response time | 0.5 ms or less | |||||
Operation indicator | Orange LED (lights up when the output is ON) | |||||
Incident beam indicator | - | |||||
Stability indicator | Green LED (lights up under stable light received condition or stable dark condition) |
|||||
Pollution degree | 3 (Industrial environment) | |||||
Protection | IP67 (IEC) | |||||
Ambient temperature | -25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉ |
|||||
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | |||||
Ambient illuminance | Incandescent light: 3,000 lx or less at the light-receiving face | |||||
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure | |||||
Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure | |||||
Vibration resistance | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude in X, Y and Z directions for two hours each | |||||
Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | |||||
Emitting element | Red LED (Peak emission wavelength: 650 nm 0.026 mil, modulated) | |||||
Material | Enclosure: Polyarylate Lens: Polyarylate |
|||||
Cable | 0.1 mm2 3-core (thru-beam type emitter: 2-core) cabtyre cable, 2 m 6.562 ft long |
|||||
Cable extension | Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (thru-beam type: emitter and receiver). (Note 5) | |||||
Weight | Net weight (each emitter and receiver): 20 g approx., Gross weight: 50 g approx. |
|||||
Accessories | Mounting screws: 1 set |
Please note that MS-EX10-□ sensor mounting brackets designed for standard-beam models cannot be used with narrow-beam models.
Notes :
1) | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉. |
---|---|
2) | Model Nos. having the suffix "-PN" are PNP output type. |
3) | Conformed from December 2021 production. |
4) | The min. sensing objects are specified in case the emitter / reciever sensing range is to set the maximum. |
5) | For safety applications, do not exceed 30 m 98.425 ft. |
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)