【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.

Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Machine Vision System > Micro-Imagechecker > PV500V2(Discontinued Products) > Specifications

PV500V2 (Discontinued Products)

Lineup
CAD data　 Catalogs　 Manuals　 Software
FAQ

We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.

	September 30, 2021

Discontinued Products
Information

System Configuration

Specifications

Dimensions

Specifications

General specifications

Item	Specifications
Rated operating voltage	24 V DC
Operating voltage range	21.6 to 26.4 V DC (including ripples)
Rated current consumption	1.5 A max. (2-camera type) / 2.0 A max. (4-camera type)
Ambient temperature during use	2-camera type: 0 to +45 ℃ +32 to +113 ℉ (no freezing or condensation) 4-camera type: 0 to +40 ℃ +32 to +104 ℉ (no freezing or condensation)
Storage ambient temperature	-20 to +60 ℃ -4 to +140 ℉ (no freezing or condensation)
Ambient humidity during use	35 to 85 % RH (at 25 ℃ 77 ℉, no freezing or condensation)
Storage ambient humidity	35 to 85 % RH (at 25 ℃ 77 ℉, no freezing or condensation)
Noise immunity	1,000 V, Pulse width: 50 ns, 1 μs (using the noise simulator method)
Vibration resistance	10 to 55 Hz, 1 sweep/min, double amplitude of 0.75 mm 0.030 in, 30 minutes each in the X, Y, and Z directions
Shock resistance	196 m/s², 5 times each in the X, Y and Z directions
Insulation resistance (initial value)	100 Ω or higher (measured by a 500 V DC megger) Input and output terminals – Power and ground terminals Input and output terminals – Non-energized metal part Power terminal – Non-energized metal part
Breakdown voltage (initial value)	500 V AC for 1 min (600 V AC for 1 sec), Cutoff current: 10 mA (Note) Input and output terminals – Power and ground terminals Input and output terminals – Non-energized metal part Power terminal – Non-energized metal part
Battery life	Approx. 10 years (at 25 ℃ 77 ℉)
Weight	Approx. 1.6 kg (with terminal blocks and connectors)

Note : The evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the unit.

Note :	The evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the unit.

Functional specifications

Item		Specifications
Input/ Output	Cameras	From the quad-speed 300,000-pixel camera (640 x 480) and 2,000,000-pixel camera (1,600 x 1,200) up to two and four cameras can be attached to the 2-camera type and 4-camera type units respectively.
	Monitor output	XGA (1,024 x 768) output
	Memory card	SD memory card
	Serial	RS-232C x 1, Ethernet x 1 PLC link function supported models: Panasonic Industrial Devices SUNX's FP series PLCs, Mitsubishi Electric: A, Q, FX (FX1N) and FX-2N (FX2N, FX3U, FX3UC) series OMRON: C, CV and CS1 series Allen-Bradley: SLC500 Fuji Electric: MICREX-SX SPH series
	USB	Compatible USB2.0, AB type
	Parallel	Phoenix terminals: 14 inputs / 15 outputs MIL terminals: 32 inputs / 32 outputs
	Keypad input	1 connector for dedicated keypad (ANPVP**)

Image processing functional specifications

Item	Specifications
Menu display	Eight languages (nine fonts) switchable
Monitor display (XGA)	Split-screen display of up to four camera images Image display: Through/Memory/NG object images Display effects: Gray scale/ Binarization group/Preprocessing group Zoom function (2 to 400 %) Display area (1,024 x 768). 16,770,000 colors
Processing methods	Gray scale processing, binary processing
カNumber of connected cameras	2-camera type: Up to two cameras, 4-camera type: Up to four cameras (Select from: Quad-speed 300,000-pixel camera and 2,000,000-pixel camera)
Camera connection	Mini camera link connector for connection by camera link (PoCL)
Trigger input	Select from: All cameras, individual cameras, detection trigger (all)
Capture method	Frame mode only. Partial capture of up to two portions. In partial capture mode, the minimum capture area to be set for the quad-speed 300,000-pixel cameras is one line, and that for the 2,000,000-pixel camera is 100 lines.
Shutter speed	30 μs to 1,000 ms (Set in increments of 10 μs)
Gain setting range	0.25 to 1.0
No. of product types	25,600 types max. (depends on setting data)
Inspection functions (Checkers)	1,000 checkers/product type max. (depends on setting data) • Position Adjustment, Position/Rotation Adjustment, Rotation Adjustment, Area Size Adjustment • Smart Edge (Circle) / (Line) function added. • Binary Window, Gray Window, Binary Edge • Gray Edge, Feature Extraction, Smart Matching, Line, Flaw Detection • Connector (Binary Window) / (Gray Window) / (Gray Edge) • Smart Edge (Circle) / (Line) • Geometry Calculation • Character/Figure Drawing
Inspection operation mode	Sequential processing : Mode compatible with the conventional model. After completing the result output, the next image capture for inspection can be started. Parallel processing : After completing the first image capture, the image capture for the next inspection can be started immediately. Image capture and inspection can be processed concurrently.
Binarization level group	26 levels/product type, 256-gray scale (0 to 255)
Preprocessing filters	Preprocessing filters: 21 types For each product type, 5 groups/camera, 10 stages max. (Dilation, Erosion, Erosion → Dilation, Dilation → Erosion, Auto Correction, Gray Cut, Area Averaging, Correction Settings, Median, Smoothing, Sobel, Prewitt, Laplacian, Edge Extraction X, Edge Extraction Y, Sharpen, Tophat, Dynamic, Frequency Extraction, Rotation, and Reflect)
Processing resolution	2,000,000-pixel camera: 1,600 horizontal x 1,200 vertical pixels Quad-speed 300,000-pixel camera: 640 horizontal x 480 vertical pixels
Numerical computation	1,000 formulae/product type max., including those for evaluation result output (depends on setting data) Calculations involving output values of inspection functions
	Operators	Four fundamental operations (+, -, ×, ÷), bracket operations, trigonometric functions (14 types), comparison functions (6 types), math functions (15 types), geometric functions (18 types)
	Statistic data operation items	Scan count / Pass count / Fail count / Average / Distribution / Max. / Min. / Range / Pass average / Pass distribution / Pass max. / Pass min. / Pass range / Fail average / Fail distribution / Fail max. / Fail min. / Fail range User limit: 1000 items/product type max.
	Other operation items	Previous data of numerical computation and evaluation result outputs, general-purpose registers
	Number of substitution items	16 items/formula
Evaluation result output	1,000 formulae/product type max., including those for numerical computation (depends on setting data) Substitution for and logical calculation of evaluation results from checkers and numerical computations
	Operators	NOT / AND / OR / XOR / Brackets
	Number of substitution items	16 items/formula
	Others	Overall evaluation condition setting, Image storing condition setting, Image output condition setting, Parallel output setting (8 outputs from OUT 0 to OUT 7 and 16 outputs from OUT 0 to OUT 15, or all setting output)
Data R/W	Four-window display of up to 80 (5x16) cells/product type on screen in table form in RUN mode. Substitution of title input, checker conditions/results, numerical computation results, numerical computation evaluation results, evaluation output results, statistical results possible. Change of upper/lower limits of numerical computation in the table in RUN mode possible.
Conversion data	Coordinates, coordinate origin, horizontal and vertical coefficients can be set for each camera to obtain actual dimensions.
Conversion data	Others	Comment input
Marker	8 markers/product type max. for each camera Graphic display on the operation screen Selectable from eight colors
Marker	Shapes	Rectangle / Circle / Ellipse / Polygon / Straight line / Cross line
Collective movement	Collective movement of set checkers in units of position/rotation correction groups. Set the movement to Yes/No. Position and rotation correction checkers cannot be moved.
Template	Re-registration position	Setting position/Correction position
Re-registration setting	Display	Yes / No
Execution mode	Execution all	Execution of all checkers
	Branch execution	Branch blocks (0 to 9) can be set.
	Designated execution	Blocks to be executed (0 to 9) can be set.