[Notification of CAD Data Download Issue]   We regret to inform you that we are currently experiencing issues with downloading CAD data for some products.
We are investigating the cause of this problem. We apologize for any inconvenience this may cause and appreciate your understanding.

AUTOMATION
CONTROLS

Search
Discontinued
Products


DP-111A-E-P-J | Dual Display Digital Pressure Sensor [For Gas] DP-100

  • Print This Page

Dual Display Digital Pressure Sensor [For Gas] DP-100

*Photo may vary from actual product.

  • RoHS Compliant This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU. 　


Product Number DP-111A-E-P-J
Part Number DP-111A-E-P-J
Product Dual Display Digital Pressure Sensor [For Gas]
Details Standard pressure port type
Product name Dual Display Digital Pressure Sensor [For Gas] DP-100

As of May 18, 2024
Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Item Specifications
Product Number DP-111A-E-P-J
Part Number DP-111A-E-P-J
Regulatory compliance and certification CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Type of pressure Gauge pressure
Rated pressure range -100.0 to +100.0 kPa
Set pressure range -101.0 to +101.0 kPa
-1.030 to +1.030 kgf/cm2
-1.010 to +1.010 bar
-14.64 to +14.64 psi
-757 to +757 mmHg
-29.8 to 29.8 inHg
Pressure withstandability 500 kPa
Applicable fluid Non-corrosive gas
Supply voltage 12 to 24 V DC ±10 % Ripple P-P 10 % or less
Power consumption Normal operation :
720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)
ECO mode :
480 mW or less at STD (Current consumption 20 mA or less at 24 V supply voltage)
360 mW or less at FULL (Current consumption 15 mA or less at 24 V supply voltage)
Comparative output <PNP output>
PNP open-collector transistor
- Maximum source current : 100 mA
- Applied voltage : 30 V DC or less (between comparative output and +V)
- Residual voltage : 2 V or less (at 100 mA source current)
Comparative output : Output operation NO / NC (selectable by key operation)
Comparative output : Output modes EASY mode / Hysteresis mode / Window comparator mode
Comparative output : Hysteresis Minimum 1 digit (variable)(however, 2 digits when using psi unit)
Comparative output : Repeatability ±0.1 % F.S.
(within ±2 digits)
Comparative output : Response time 2.5 ms, 5 ms, 10 ms, 25 ms, 50 ms, 100 ms, 250 ms, 500 ms, 1,000 ms, 5,000 ms, selectable by key operation
Comparative output : Short-circuit protection Incorporated
External input <PNP output>
ON voltage : 5 V to +V DC
OFF voltage : 0.6 V DC or less, or open
Input impedance : 10 kΩ approx.
Input time : 1 ms or more
Analog voltage output Output voltage : 1 to 5 V DC
Zero point : within 3 V ±5 % F.S.
Span : within 4 V ±5 % F.S.
Linearity : within ±1 % F.S.
Output impedance : 1 kΩ approx.
Analog current output Output current : 4 to 20 mA
Zero point : 12 mA ±5 % F.S.
Span : 16 mA ±5 % F.S.
Linearity : within ±1 % F.S.
Load resistance : 250 Ω (max.)
Display 4 digits + 4 digits 3-color LCD display
(Display refresh rate : 250 ms, 500 ms, 1,000 ms, selectable by key operation)
Display : Displayable pressure range -101.0 to +101.0 kPa
-1.030 to +1.030 kgf/cm2
-1.010 to +1.010 bar
-14.64 to +14.64 psi
-757 to +757 mmHg
-29.8 to 29.8 inHg
Indicator Orange LED
(Comparative output 1 operation indicator : Lights up when comparative output is ON, Analog voltage output operation indicator : Lights up when setting)
Protection IP40 (IEC)
Ambient temperature -10 to +50 ℃ +14 to +122 ℉, Storage : -10 to +60 ℃ +14 to +140 ℉
Ambient humidity 35 to 85 % RH (No dew condensation or icing allowed), Storage : 35 to 85 % RH
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 50MΩ or more with 500 V DC megger between all supply terminals connected together and enclosure
Vibration resistance 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude or maximum acceleration 196 m/s2, in X, Y and Z directions for two hours each
(when panel is mounted: 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude or maximum acceleration 49 m/s2, in X, Y and Z directions for two hours each)
Shock resistance 100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each
Temperature characteristics Within ±0.5 % F.S.
(at +20 ℃ +68 ℉)
Pressure port M5 female thread + G 1/8 male thread
Material Enclosure : PBT (glass fiber reinforced), LCD display : Acrylic, Pressure port : Stainless steel (SUS303), Mounting threaded part : Brass (nickel plated), Switch part : Silicone rubber
Connecting method Connector
Cable length Total length up to 100 m 328.084 ft (less than 30 m 98.425 ft when conforming to CE marking) is possible with 0.3 mm2, or more, cable

Return to top

Accessories (Option)

no_image
Product Number CN-14A
Part Number CN-14A
Product name Connector
no_image
Product Number CN-14A-C1
Part Number CN-14A-C1
Product name Connector-attached cable
no_image
Product Number CN-14A-C2
Part Number CN-14A-C2
Product name Connector-attached cable


More



Return to top

CONTACT US
If you have any questions, please select the option below to contact us or find answers.
CONTACT BY EMAIL / PHONE FIND LOCAL OFFICE

Return to top

CONTACT US
BY EMAIL
Please click your area to select country or region







BY PHONE

Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)