Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Light Curtains / Safety Components > Optical Touch Switch SW-100 > Part Number > SW-101
*Photo may vary from actual product.
Product Number | SW-101 |
Part Number | SW-101 |
Product | Optical Touch Switch |
Product name | Optical Touch Switch SW-100 |
As of May 21, 2024
Specifications and design of the products are subject to change without notice for the product improvement.
Item | Specifications |
---|---|
Product Number | SW-101 |
Part Number | SW-101 |
Sensing method | Thru-beam type photoelectric sensor (2 beam axes) |
Applicable standards | CSA 22.2 No.14, CSA 22.2 No.0.8, ANSI / NFPA 79, UL 508, EN 60947-5-2 (EMC only) |
Power voltage | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
Current consumption | 100 mA or less (excluding external connection load) |
Outputs | Semiconductor Photo-MOS relay output × 3 - Maximum load current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1.5 V or less (at 100 mA of load current) |
Output:Output operation | Output 1: When an object is detected (beam is interrupted): OFF / When an object is not detected (beam is received): ON Output 2, 3: When an object is detected (beam is interrupted): ON / When an object is not detected (beam is received): OFF |
Output:Short-circuit protection | Incorporated |
Response time | 100 ms or less when an object is detected 50 ms or less when an object is not detected |
Time-out function | Switchable either effective or ineffective by short-circuiting terminals (disabled when short-circuited) |
External input | 0 to 1 V or 10 V to +V: Valid (External input indicator lights up) 4 to 6 V or Open: Invalid (External input indicator lights off) |
Indicators:Power indicator (POWER) | Green LED (lights up when the power is ON) |
Indicators:Operation indicator (OPE.) | Green LED (lights up when an object is detected) |
Indicators:External input indicator 1 | Green LED (lights up when external input 1 is valid) |
Indicators:External input indicator 2 | Orange LED (lights up when external input 2 is valid) |
Indicators:Fault indicator (FAULT) | Yellow LED (blinks or lights up when fault occurs) |
Environmental resistance:Degree of protection | IP65 (IEC), TYPE 1 (UL 50) (excluding terminal part) |
Environmental resistance:Ambient temperature | -25 to +50 ℃ -13 to +122 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉ |
Environmental resistance:Ambient humidity | 30 to 85 % RH, Storage: 30 to 85 % RH |
Ambient illuminance | Incandescent light: 3,000 Lx or less at the light-receiving face |
Environmental resistance:Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Environmental resistance:Insulation resistance | 20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure |
Vibration resistance | 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude in X, Y and Z directions for two hours each |
Environmental resistance:Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each |
Removable-type terminals:Connector | 3.5 mm 0.138 in pitch, 2-level socket: 12 pins |
Removable-type terminals:Terminal part | 3.5 mm 0.138 in pitch spring-cage terminals: 6 pins × 2 (FMC1,5 / 6-ST-3,5GS manufactured by Phoenix Contact) |
Maximum cable length | Up to 20 m 65.617 ft (for cable from 0.2 to 0.3 mm2 ), Up to 100 m 328.084 ft (for cable from 0.3 to 1.5 mm2 ) |
Material | Enclosure: Polycarbonate, Polyester O-ring: Silicone rubber Mounting nut: PBT Mounting packing: Silicone rubber |
Weight | Net weight: 130 g approx. Gross weight: 200 g approx. |
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)