Configurator WD Ver.1.77

Information you need to know before using the software (Essential reading)

About Configurator WD Ver.1.77

Control Configurator WD Ver.1.77 IP address Search Tool (hereinafter referred to as this software) is designed to search products below*1 on the same network, and display a list of information such as IP addresses and versions. Also, IP addresses can be changed, and firmware update or communication settings can be performed depending on models.

(*1) : Applicable products

  • Programmable Controllers / Interface Terminal
    - FP7 CPU units
    - FP7 Communication Cassette (Ethernet type)
    - FP-X Ethernet Communication Cassettes
    - FP-XH Ethernet type (C40ET/C60ET)
  • Human Machine Interface
    - Programmable Displays GT32 (Advanced type)/GT703/GT704
  • Machine Vision System
    - PV500/PV500V2
    - PV200/PV200MC/PV230/PV240/PV260
  • Energy Management Solutions
    - Web Datalogger Unit
    - Data Logger Light
    - ELC500
    - KS1 Signal Converter
    - KW2M-A/KW2M-X
  • Measurement Sensors
    - HL-C21C Series (Ethernet-compatible type)
  • Laser Markers
    - LP-GS

Return to top

Caution

Be aware of the following points listed below.
This software is freeware. The copyright for this software is held by Panasonic Industrial Devices SUNX Co., Ltd. By using this software it is assumed that you agree to "Conditions of Use" presented below.

Conditions of Use

  • Panasonic Industrial Devices SUNX does not warrant anything regarding the use of this software.
  • Panasonic Industrial Devices SUNX will not assume responsibility of any sort for direct, indirect, repercussive, resulting or special damage that results from using this software or from the operation of the software itself.
  • Panasonic Industrial Devices SUNX does not restrict the use, copying or distribution of this software.
    However, when copying or distributing, Panasonic Industrial Devices SUNX prohibits the procurement of fees other than the cost of media, and prohibits the applying of restrictions in use of the software.

System Requirements

Make sure that the computer on which you intend to run the software meets the minimum specifications listed below.

OS Windows XP/ Vista /7 /8 /8.1 /10
Available hard disk space More than 40 MB
Recommended CPU Pentium 100MHz or better
Recommended system RAM More than 64 MB (depends on OS)
Recommended display resolution 800*600 or more
Recommended color depth High color (16 bits) or better
Applicable Models [Programmable Controllers / Interface Terminal]
FP7 CPU units, FP7 Communication Cassette (Ethernet type), FP-X Ethernet Communication Cassettes, FP-XH Ethernet type (C40ET/C60ET)
[Human Machine Interface]
Programmable Displays GT32 (Advanced type)/GT703/GT704
[Machine Vision System]
PV500/PV500V2, PV200/PV200MC/PV230/PV240/PV260
[Energy Management Solutions]
Web Datalogger Unit, Data Logger Light, ELC500, KS1 Signal Converter, KW2M-A/KW2M-X
[Measurement Sensors] HL-C21C Series (Ethernet-compatible type)
[Laser Markers] LP-GS

How to Install

1.Click on the title of the file name (listed below) that you want to download and indicate the download destination.

*When you already have indicated the download destination, the file will be downloaded automatically.

Title Language Version File size Update
configurator_wd_v177.exe EN 1.77 7.5MB February 24, 2021

2.When the download is finished, double-click the file to activate the "IP Address Search Tool".

　
 

Return to top