[System Maintenance Notice]
Due to ongoing system maintenance, the site search and specification search functions are temporarily unavailable. We apologize for any inconvenience this may cause and appreciate your understanding.

Data Logger Light (DLL) Firmware Detailed Version-Up Information

Version-up Information

Version-Up Information(Ver.2.60 to Ver.2.61) (April 1, 2021 Update)

The following points have been upgraded.

[Modify the errors]

  • Fixed the problem of sending commands even in STOP mode when a timeout occurred in RS-232C communication and RS-485 communication.
  • Fixed the problem that the system history file and trigger history file could not be generated in the setting conditions.

Version-Up Information(Ver.2.50 to Ver.2.60) (November 1, 2019 Update)

The following points have been upgraded.

[Add functions]

  • "Mewtocol connection timeout" can be set in the range of 5 to 60 seconds. Old version is fixed 60 seconds.)

[Change specifications]

  • Changed "Sending cycle of collecting command" to "Waiting time of collecting command" in RS232C/485 setup dialog and added radio button to select "Time from send command" or "Time from receive command".

[Modify the errors]

  • Cannot write 2-word data to Special Data Register.
  • Data collection stops due to error response (Ex. format error) in RS-232C communication.
  • "Output" in System history log file is recorded with incorrect value when reset trigger in data setup occurs.

Version-Up Information(Ver.2.40 to Ver.2.50) (September 1, 2016 Update)

The following points have been upgraded.

[Add functions]

  • Add ability to synchronize with the clock of KW1M-H.
  • Add a new trigger that occurs when a register value is different from the previous one.
  • Add a function to check the data length of MEWTOCOL and MODBUS (RTU).

[Modify the errors]

  • Trigger condition occurs every time.
  • Anonymous FTP users cannot get the accumulation file from USB port.
  • In the list of accumulation files from USB, the files or folders containing spaces or Chinese characters have abnormal display or will not open.
  • In the data setting, data was recorded wrongly on special register.

Version-Up Information(Ver.2.20 to Ver.2.40) (November 10,2015 Update)

The following points have been upgraded.

[Add functions]

  • Add 'Main unit' as an option for I/F communication at 'Logging device registration'.
  • Add ‘1,2,3,4’ as options for FTP retry interval.
  • Add resister for software reset.
  • Collect 64-bit data.
  • Available to set that it doesn't save the setup data history in system file.
  • Available to download csv file via USB cable.

[Change specifications]

  • Change the no communication time-out of TCP/IP(port 9094,9095) from 5 sec. to 60 sec.
  • Change initial value
     -'Check battery voltage' : from No to Yes

[Modify the errors]

  • It will become not to connect FTP via FTP client.
  • It sometimes doesn't upload the logging file after recovery the connection when it can't connect to FTP server for long time.
  • It doesn't set time-out for sending mail correctly.
  • It sometimes doesn't attach the current file when the trigger for sending mail is same as the trigger for logging.
  • It can't shift to RUN mode for 30 minutes when LAN I/F link down during it set to obtain an IP address by DHCP.
  • Accumulated ON time and total switching time show minus value when it is over 32767.
  • It occurs the device error when the logging file name has space at the last.
  • FTP client connect with No.21 when it set except No.21.
  • Trigger doesn't occur at the end of month even if it set 'Month-end'.
  • It retry even if it has no file for FTP upload.

Version-Up Information(Ver.2.11 to Ver.2.20) (February 3. 2014 Update)

The following points have been upgraded.

[Add functions]

  • Below error codes are added.
    E0025 Device error (Logical error of SD memory card)
    E0029 Write protect error (When using SD memory card with lock)
  • Initializing the settings and setting time via Configurator DL are recorded with system history.

[Modify the below errors]

  • Revise a problem that SD memory card is broken when insert it.
  • Improve the exclusion control in case of competing access to log files.
  • Revise a problem that time setting is initialized.
  • Revise a problem that file name or folder name is got garbled.

[Change specifications]

  • Error LED will be blinking at below errors, SD memory card capacity shortage, Device error, Write protect error.
    (At the other errors, error LED turn on.)
  • When lower communication error is happened, logs of communication error and recovery are recorded with system history.

Version-Up Information(Ver.2.10 to Ver.2.11) (June 3. 2013 Update)

The following points have been upgraded.

[Add functions]

  • Record station number into sentences in sending e-mail when data collecting errors occur.

[Modify the below errors]

  • Revise a problem of a device driver.
  • Stabilize procedures during power on.
  • Revise a problem of PWD command (FTP command)
  • Revise a problem that a setting value is not recorded in the system history after changing data configuration.

Version-Up Information(Ver.2.06 to Ver.2.10)

The following points have been upgraded.

[Add functions]

  • Retry function for FTP client.

[Change specifications]

  • Change the error code.
    E0050 battery error/file attachment failure -> E0049 file attachment failure, E0050 battery error

[Modify the below errors]

  • It sometimes doesn’t send mail when sending mail to several destinations.

Version-Up Information(Ver.2.05 to Ver.2.06)

The following points have been upgraded.

[Modify the below errors]

  • Calculating procedures of differential value measurement when the logging trigger is detected.

Version-Up Information(Ver.2.04 to Ver.2.05)

The following points have been upgraded.

[Modify the below errors]

  • I revised malfunction of the clock IC abnormality.
  • I revised the exclusive control disposal of communication ports.

Version-Up Information(Ver.2.03 to Ver.2.04)

The following points have been upgraded.

[Modify the below errors]

  • I revised the problem that might become the file opening error.
  • FTP communication revised the problem that might become suspended.

Version-Up Information(Ver.2.02 to Ver.2.03)

The following points have been upgraded.

[Modify the below errors]

  • In the case of data form of 32 bits, I revise the malfunction that a CRC error produces by MODBUS communication.

Version-Up Information(Ver.2.01 to Ver.2.02)

The following points have been upgraded.

[Modify the below errors]

  • I revised communication re-try malfunction in MODBUS.

Version-Up Information(Ver.2.00 to Ver.2.01)

The following points have been upgraded.

[Modify the below errors]

  • I revised the malfunction of the DT register number of the system history.

Version-Up Information(Ver.1.11 to Ver.2.00)

The following points have been upgraded.

[Add functions]

  • MODBUS (RTU) protocol is added.

[Change functions]

  • When set it simply; "Make the destination folder name of logging file [CF]. " I should remain in effect.

[Modify the below errors]

  • When I attach logging file (CURRENT file) and transmit a message, there is not designation of the transmission,I revised malfunction to become the file opening error after progress at time.
  • In the case of half size 32 characters, an logging device name revised malfunction to be out of the header of the logging file.

Version-Up Information(Ver.1.10 to Ver.1.11)

The following points have been upgraded.

[Modify the below errors]

  • The number of Logging device registration revised the malfunction that I could not register to the maximum (300).

[Add functions]

  • For an email attachment file name, half size space is valid.
    *Depending on an email server, there is a case of the invalidity.

Version-Up Information(Ver.1.04 to Ver.1.10)

The following points have been upgraded.

[Add functions]

  • Improve the data collecting process.
  • Improve the system history information.

[Modify the below errors]

  • When the integral part of logging data is "0", it can't make minus value.
  • File creating timing of "POW" .

Return to top

 

Return to top