System ladder for SD memory card version-up Ver.1.10
Information you need to know before using the software (Essential reading)
About System ladder for SD memory card version-up Ver.1.10
You can download the latest system ladder for the control unit ELC500 main unit.
You can use SD memory card to download without FPWIN Pro7.
Caution
Be aware of the following points listed below.
The copyright for this software is held by Panasonic Industrial Devices SUNX Co., Ltd.
By using this software it is assumed that you agree to "Conditions of Use" presented below.
You may not reverse-engineer, decompile, or disassemble this software.
How to Install
1.Click on the title of the file name (listed below) that you want to download and indicate the download destination.
*When you already have indicated the download destination, the file will be downloaded automatically.
 |
Title | Language | Version | File size | Update |
|---|---|---|---|---|---|
| elc500_sd_verup_system_ladder_v110.zip | EN | 1.10 | 22.2KB | September 15, 2020 |
After the download is completed, unzip the ZIP file.
2.Transfer the unzipped file to the control unit ELC500.
- Save the unzipped file to the SD memory card.
- Set the mode selector switch of this unit to "STOP/PROG.".
- Insert the SD memory card into this unit and close the SD memory card cover.
- Push the mode switch to the COPY side until the COPY LED lights up.
- When the COPY LED goes off, the system ladder program update is complete.
[Note]
When creating a user program with FPWIN Pro7, do not update using an SD memory card.
The user program will be erased if you update using the SD memory card.
