Version-UP Information (Ver.1.50 to Ver.1.60) (December 3, 2018 update)
The following points have been upgraded.
[Add functions]
- Add function to save display item.
- Add function to initialize settings.
[Improve functions]
- Improve the reliability of display function. (Strengthen restore processing when display abnormality occurs.)
Version-UP Information (Ver.1.42 to Ver.1.50) (February 2017 update)
The following points have been upgraded.
[Add functions]
- Add 115,200bps and 57,600bps to RS485 transmission speed.
- Support measurement resolution of integral active power from 0.01Wh.
Version-UP Information (Ver.1.41 to Ver.1.42) (June 2016 update)
The following points have been upgraded.
[Improve functions]
- Improve reading of THD values (voltage and current) easier.
Version-UP Information (Ver.1.40 to Ver.1.41) (April 2016 update)
The following points have been upgraded.
[Modify the below errors]
- Improve the flicker of display.
Version-UP Information (Ver.1.30 to Ver.1.40) (July 2015 update)
The following points have been upgraded.
[Add functions]
- Add functions of current cut-off.
- Available to select line voltage of 3P4W for alarm target phase.
Version-UP Information (Ver.1.20 to Ver.1.30) (July 2014 update)
The following points have been upgraded.
[Add functions]
- Reset function with communication.
[Improve functions]
- Improve calculation method of total integral power when integral power of one phase returns to '0'.
Version-UP Information (Ver.1.10 to Ver.1.20) (February 2014 update)
The following points have been upgraded.
[Add functions]
- Readout function of power factor status lead / lag
[Change specifications]
- Improve the accuracy of power measurement with unbalancing load at 3P3W system.