Information you need to know before using the software (Essential reading)
"Configurator EL500" is the application software in order to setup of ELC500 Control Unit.
Install to your PC and you can setup ELC500 Control Unit without the main unit.
Setup data can be transmitted to ELC500 Control Unit and read out from ELC500 Control Unit via USB or Ethernet.
Be aware of the following points listed below.
This software is freeware. The copyright for this software is held by Panasonic Industrial Devices SUNX Co., Ltd. By using this software it is assumed that you agree to "Conditions of Use" presented below.
Make sure that the computer on which you intend to run the software meets the minimum specifications listed below.
|OS*1||Windows® 10 Pro (*2)/ Windows®11 Pro
(Windows® 7 Professional SP1以上(*2) /Windows® 8(※2) /Windows®8.1(*2) )
|Required hard disc capacity*3||500MB (Not include the capacity of saving setup data)|
|CPU||64-bit processor with 2 Cores or more at 1 GHz|
|Loaded memory||4GB or more|
|Image resolution||WXGA(1280 x 768) or more|
|*1||For those downloaded after September 20, 2023, the supported OS is Windows 10/11only.|
|*2||32 bit edition / 64 bit edition|
|*3||When .NET Framework4.0 is installed, it is necessary 4.5GB or more. Refer to the website of Microsoft.|
*When you already have indicated the download destination, the file will be downloaded automatically.
|config_el500_freev110.exe||EN||1.10||62.4MB||September 15, 2020|
The contents of the "License Agreement" that is displayed in the middle, please be sure to confirm.