Laser Marker Smart Utility Detailed Version-Up Information

The following points have been upgraded.

• To improve compatibility with LP-400/V/M/S/Z, selectable option is added for not generating a warning even when the graphic file is not specified.
• Improvement made to show barcode and 2D code sizes that does not include quiet zone.

The following points have been upgraded.

• Fixed an issue where the system offset setting is reflected in the marking image.
• When the version of the LP-AEB10 expansion board and the laser marker do not match at the first startup, the language can be set.
• When the Z position of the LP-ZV is set, when the sum of the Z position and defocus setting exceeds the range of -25mm~+25mm, the E692 error is correctly generated.
• When the defocus setting value is greater than 0 when the spot uniform mode is enabled on the LP-ZV, a warning that the setting range has been exceeded is displayed on the NAVI Smart screen.
• Fixed an issue where when converting a file using the 3D settings of the LP-M/Z series, if the rotation of the entire file condition is set, it will be displayed and printed in a different position than before conversion.
• Fixed an issue when in 3D cone setting, the focal position is affected by the direction of the marking line.
• Fixed an issue where file conversion could not be performed in an Japanese environment when the file name or folder name of an LP-400/V/M/S/Z file contains characters other than Japanese.
• Fixed an issue where the position of visible characters in barcodes and 2D codes could not be set when NAVIsmart 2.0.0 or later and LP-GS/RC/RF/RV with controller version lower than 2.0.0 were connected online.
• Fixed an issue where E661 may occur when the marking data is outside the area range in 3D setting printing instead of E692.
• Fixed an issue where some CODE128 visible characters were not displayed when connecting NAVIsmart 3.2.0 or later and LP-RF/RV/ZV with controller version less than 3.2.0 online, or editing LP-RF/RV marking files.