LP-ABR10 Firmware

Information you need to know before using the software (Essential reading)

About LP-ABR10 Firmware

LP-ABR10 Firmware Ver.M001d is the firmware software for 2D code reader LP-ABR10 series.

For only this version, LP-ABR10 will be initialized regardless of the option that saves the setting at the update.
Save the setting data to PC or a something before you start update. Saved setting data can be used on LP-ABR10 after update.

Configurator LP-ABR should be installed to use the LP-ABR10 firmware.
Download the latest Configurator LP-ABR from the software download page.

Return to top


The copyright for this software is held by Panasonic Industrial Devices SUNX Co., Ltd.
By using this software it is assumed that you agree to "Conditions of Use" presented below.
The download of this software is limited to customers who have LP-ABR11/12.
You may not reverse-engineer, decompile, or disassemble this software.

Conditions of Use

  • Panasonic Industrial Devices SUNX does not warrant anything regarding the use of this software.
  • Panasonic Industrial Devices SUNX will not assume responsibility of any sort for direct, indirect, repercussive, resulting or special damage that results from using this software or from the operation of the software itself.
  • Panasonic Industrial Devices SUNX does not restrict the use, copying or distribution of this software.
    However, when copying or distributing, Panasonic Industrial Devices SUNX prohibits the procurement of fees other than the cost of media, and prohibits the applying of restrictions in use of the software.

How to Install

1.Click on the title of the file name (listed below) that you want to download and indicate the download destination.

*When you already have indicated the download destination, the file will be downloaded automatically.

Title Language Version File size Update
lp-abr10_m001f.zip EN M001f 290.8KB January 5, 2021

2.Copy the downloaded file to the specified location.

  • Decompress the downloaded file. Place the following three files in the same folder.
    (decApp, download.prm, halcon_asl.lic)

3.Execute the upgrade process using Configurator LP-ABR.

  • Execute the upgrade process through Configurator LP-ABR, Advance "setting-System(S)"-"Firmware Update".
  • Select the file "download.prm" in the executed file.
  • Select "Keep configuration" or "Default configuration" and click "Update".

    * For only this version, it will be default setting even if "Keep configuration" is selected.
    Save the setting data to PC or a something before you start update. Saved setting data can be used on LP-ABR10 after update.
  • Wait about 3 minutes for complete after the update has started.

    * Do not turn of the power of LP-ABR10 during the firmware update.
    It may cause the file system destroyed and the software may not startup.
  • Click "Close" when "Firmware update completed" is displayed.
  • Click "System(S)"-"Reset" and restart LP-ABR10.

Return to top