PCWAY Detailed Version-Up Information

The following points have been upgraded.

• The installation folder was changed to '\Program Files (x86)\Panasonic-ID SUNX Control' and the group was changed to '\Panasonic-ID SUNX Control'.

The following points have been upgraded.

• Supports the Windows 10.

The following points have been upgraded.

• Fixed the problem that it was not possible to change the default work folder to another folder on Windows 7.

• Fixed the problem that the monitor may not be started when it is tried using macro right after the start of PCWAY.

The following points have been upgraded.

• The corporate name, Panasonic Electric Works, Co., Ltd., has been changed to Panasonic Electric Works SUNX Co., Ltd..

• Supports Microsoft(R) Windows 7. (32-bit and 64-bit versions)

• Supports Microsoft(R) Excel2010.

• Previous versions (2.*) can be updated to this version or later.

• Corrected the error that different registers of multiple units were not monitored correctly in the same sheet.

The following points have been upgraded.

• Fixed the problem that monitor can not be done correctly if different unit number's data is registered in one sheet.

The following points have been upgraded.

• Changed the display format of the disabled icons on the PCWAY toolbar.

• Fixed the error that PCWAY abends by executing the download via FTP when the specified unit number for the Ethernet remote connection and the specified unit number for the FTP download differs.

• Fixed the error that PCWAY abneds by executing the download via FTP whne the network type is other than Ethernet local or Remote.

• Fixed the error that multiple files in the same DLU cannot be downloaded via FTP.

• Fixed the error that the download via FTP cannot be performed if a file name with the folder name has been registered in the file master registration.

• Fixed the error that e-mail communication will not be executed and a mail is not sent even if the monitor is started when the trigger device for e-mail communication has turned on while the monitor is paused.

• Fixed the error that the contact for the OFF display changes to the ON display when a communication error has occurred during monitoring contact data.

• Fixed the error that monitoring cannot be perofmred correctly when WX, WY, WR and WL are allocated in cells for multiple units.

• Fixed the writing error when performing overwrite save in the registration of arithmetic expression.

• Fixed the error that PCWAY logger cannot access PLCs with other unit numbers using PLC link unit.

• Fixed the error that the setting of "Communication with the setting unit no. of the Ethernet connection" in the operating environment setting is not reflected in PCWAY logger.

• Fixed the error that data is not displayed in Excel once the number of records of a file exceeds 13768 when using PCWAY with Excel2003 or later.

The following points have been upgraded.

• Supports WindowsVista and Excel2007.

• Drops support for Windows95 and Excel95.

• Supports the USB communication of GT32 through mode.

• Fixed the followings;
  - Error message "Modem not connected" is displayed when disconnectting modem connection.
  - When displaying the relay data of more than two PLC's in word format in cell setting, PLC's register data sometimes cannot be displayed.
  - When using the file master no., of over 100, the message "Node [%d] is not connected. Please check." is displayed.

• Supports the FP-X

• Supports the WR10 and Eco-Power Meter KW4M.

• Password can be canceled even password is not set in sheet protection.

• Supports max. 15 COM ports of PCWAY logger

• Added the function that can get COM ports which PCWAY specified to PCWAY logger.

• Added the hidden function of progress bar to PCWAY logger.

• Fied the followings;
  - In modem connection, retry processing keeps retrying when disconnected.
  - In Cell Setting, category character strings of the cell setting disappears when changing [Update Method] in setting [Display Specified record].
  - All setting data of file master cannot be output to the CSV file.
  - When setting cell with sequential device no., PCWAY stop operating if informing relay of auto macro is set.
  - In interval timer processing, PCWAY keeps checking the connection during its operation even if PLC is disconnected (Normally, PCWAY check the connection by retry setting time).

The following points have been upgraded.

• Changes NAiS to Panasonic.

The following points have been upgraded.

• Fixed the followings;
  - When you use E-mail function, memory leak occurs and PCWAY carries out unstable operation.
  - When you use PCWAY, which is less than Ver.2.1, tthe message file cannot be converted to new file format.
  - The renewal of connection state cell becomes late, if there is no PLC device on the same sheet.
  - The communication error occurs or the abnormal value is displayed, when you monitor uncontinuous relay of over 81 in FP Sigma.
  - The menu 'Help', 'Modem Connection' and 'Save HTML file' has no effect.
  - The 'Compile' menu opens the "Modem Connection".
  - Not possible to enter the number of the informing event in the File Trigger Dialog.