PVWIN200 Ver.2.21 for setting PV200 and PV200 MC

Information you need to know before using the software (Essential reading)

About PVWIN200 Ver.2.21 for setting PV200 and PV200 MC

PVWIN200 for setting PV200 and PV200 MC supports the settings and simulation of PV200 and PV200 MC on PC.


  • 1.PVWIN200 is able to set up the environment parameter and the inspection parameter on PC.
    ( But PVWIN200 is not able to set up Camera adjustment. )
  • 2.PVWIN200 is easily able to set up the adjustment of the inspection parameter, because it is able to the inspection simulation on PC.
  • 3.PVWIN200 is able to run the inspection simulation all image that Image Receiver takes.

Restriction Content

  • 1.PVWIN200 is able to download after buying PV200 or PV200 MC
  • 2.When you save the setting data of old version of PV200 and PV200 MC by using new version of PVWIN200, there is a case that can't save it if you are using new function.
    At the time, you can save it by deleting the setting data of new function.
  • 3.Please use 32 bits or more in the Full Color of PC.
    If you use PVWIN200 under 32 bits, the result that the inspection result differs with PV200 and PV200 MC will occur.
  • 4.Please refer the help file about the using method of PVWIN200.
  • 5.PVWIN200 doesn't use the setting data of PV230/PV240/PV260.

Correspondence table of PV200 and PV200 MC

PVWIN200 PV200/PV200 MC Applicable PV200/PV200 MC
Ver.2.21 Ver.2.21 Ver.1.00 - 2.21
Ver.2.20 Ver.2.20 Ver.1.00 - 2.20
Ver.2.13 Ver.2.13 Ver.1.00 - 2.13
Ver.2.12 Ver.2.12 Ver.1.00 - 2.12
Ver.2.10 Ver.2.10 Ver.1.00 - 2.10
Ver.2.00 Ver.2.00 Ver.1.00 - 2.00
Ver.1.90 Ver.1.90 Ver.1.00 - 1.90
Ver.1.81 Ver.1.81 Ver.1.00 - 1.81
Ver.1.80 Ver.1.80 Ver.1.00 - 1.80
Ver.1.72 Ver.1.72 Ver.1.00 - 1.72
Ver.1.71 Ver.1.71 Ver.1.00 - 1.71
Ver.1.70 Ver.1.70 Ver.1.00 - 1.70
Ver.1.63 Ver.1.63 Ver.1.00 - 1.63
Ver.1.61 Ver.1.61 Ver.1.00 - 1.61
Ver.1.60 Ver.1.60 Ver.1.00 - 1.60
Ver.1.50 Ver.1.50 Ver.1.00 - 1.50
Ver.1.43 Ver.1.43 Ver.1.00 - 1.43
Ver.1.40 Ver.1.40 Ver.1.00 - 1.40
Ver.1.33 Ver.1.33 Ver.1.00 - 1.33
Ver.1.32 Ver.1.32 Ver.1.00 - 1.32
Ver.1.31 Ver.1.31 Ver.1.00 - 1.31
Ver.1.30 Ver.1.30 Ver.1.00 - 1.30
Ver.1.22 Ver.1.22 Ver.1.00 - 1.22
Ver.1.20 Ver.1.20 Ver.1.00 - 1.20
Ver.1.10 Ver.1.10 Ver.1.00 - 1.10
Ver.1.01 Ver.1.00 Ver.1.00
Ver.1.00 Ver.1.00 Ver.1.00
* PV200 MC released from Ver.1.31.

Return to top


This software is freeware.

Be aware of the following points listed below.
This product incorporates the following software:

(1) The software developed independently by or for Panasonic Industrial Devices SUNX Co., Ltd.
(2) The software owned by third party and licensed to Panasonic Industrial Devices SUNX Co., Ltd.
(3) Open sourced software licensed under license terms

>>Click here to download copyright and license information in EnglishNew Window

By using this software it is assumed that you agree to "Conditions of Use" presented below.

Conditions of Use

  • Panasonic Industrial Devices SUNX does not warrant anything regarding the use of this software.
  • Panasonic Industrial Devices SUNX will not assume responsibility of any sort for direct, indirect, repercussive, resulting or special damage that results from using this software or from the operation of the software itself.
  • Panasonic Industrial Devices SUNX does not restrict the use, copying or distribution of this software.
    However, when copying or distributing, Panasonic Industrial Devices SUNX prohibits the procurement of fees other than the cost of media, and prohibits the applying of restrictions in use of the software.

System Requirements

Make sure that the computer on which you intend to run the software meets the minimum specifications listed below.

OS *1 Windows XP/ Vista / 7*2 / 8*2 / 8.1*2 / 10*2
Recommended CPU PentiumIII 700 MHz or better
Recommended system RAM More than 512 MB (depends on OS)
Available hard disk space

More than 170 MB
*The space for the images and the project files is not included.

Recommended color depth Full colors (32 bits) or more
Recommended display resolution 1024*768 or more
Communication interface USB 2.0, TCP/IP Ethernet (1G bps compatible)
Applicable IPD PV200/PV200 MC
*1 OS except Windows®7, 8, 8.1 and 10 supports 32 bits type only.
*2 Please refer "USB Install manual(PDF)", when you use PVWIN200 on Windows®7, 8, 8.1 or 10.
>>Go to "USB Install manual(PDF)" download

How to Install

1.Click on the title of the file name (listed below) that you want to download and indicate the download destination.

*When you already have indicated the download destination, the file will be downloaded automatically.

  • Download(75.1MB)

2.When the download is finished, double-click the file to begin the installation process.

*The installer might prompt you to uninstall the older version of PVWIN200 before installing the new version of PVWIN200.


Return to top