Motor capacity selection software for AC Servo Motors: "Mselect" Detailed Version-Up Information

Version-up Information

Version-Up Information: Software Ver.3.2.0.0, Data Ver.1.1.E.8

The following points have been upgraded.

2022.6.16

  • Due to the change of company name, the company name in related documents has also been changed.
  • Added new models with the release of the A6 Series batteryless absolute encoder type.
  • Corrected the regenerative allowable power of A6 Series driver D frame 200 V, A5 series driver C frame 200 V, D frame 200 V, E frame 200 V, F frame 200 V, A5 series (English / Chinese version) driver D frame 400 V, E frame 400 V, F frame 400 V.
  • Corrected the instantaneous regenerative power of the A5 Series driver (F frame 200 V).

Version-Up Information: Software Ver.3.1.9.0, Data Ver.1.1.E.7

The following points have been upgraded.

2020.7.20

  • Added A6 series 400 V [Special order] MSMF series 1 kW to 5 kW, MHMF series 1 kW to 5 kW, MDMF series 1 kW to 5 kW and MGMF series 0.85 kW to 4.4 kW to English and Chinese versions.

Version-Up Information: Software Ver.3.1.8.0, Data Ver.1.1.E.6

The following points have been upgraded.

2019.9.5

  • Newly added A6 series motors MDMF series 7.5 kW, 11 kW, 15 kW, 22 kW, MGMF series 5.5 kW, MHMF series 7.5 kW and corresponding drivers G frame and H frame.
  • Removed A4-series (including A4P-series) due to product discontinuance.

Version-Up Information: Software Ver.3.1.7.0, Data Ver.1.1.E.5

The following points have been upgraded.

2018.5.15

  • Newly added A6-series MGMF type 2.4kW motor and driver (frame-E).
  • Newly added models for geared servomotors.
  • Newly added connector kit part number DV0PM20103.Deleted part number DV0PM20025.
  • Newly added connector kit DV0PM20102 (for RS485, 232C communication). Deleted part number DV0PM20024.
  • Corrected inertia ratio from "below 20:1" to "below 15:1" for models MSMF092L1** and MHMF092L1**.
  • Fixed the bug which caused errors on some windows systems where the settings of decimal symbol "comma" was not used.

Version-Up Information: Software Ver.3.1.6.0, Data Ver.1.1.E.4

The following points have been upgraded.

2016.5.31

  • Added new models according to A6 Series release.
  • Modified that the continuous stall torque is used for the judgement of the holding torque at stop when the stall torque factor is available for the input value.

Version-Up Information: Software Ver.3.1.5.0, Data Ver.1.1.E.3

The following points have been upgraded.

2015.10.7

  • Modified the indication of motor rotation speed when we input "- (minus)"into rotation speed on the running pattern graphic.
  • Modified indication of the optional regenerative resister selection.
    Before : No indication of required specification of the regenerative resister, Resister value (ohm) and Wattage (W) when the result is over our option resister specification.
    After : Indicated.

Version-Up Information: Software Ver.3.1.4.0, Data Ver.1.1.E.3

The following points have been upgraded.

2015.8.6

  • The description of the name of the company of a related document is changed along with the company name change.
  • Added the tab of "Other 2 " and the discription of the safety bypassplug number of DV0P20094 in this tab.

Version-Up Information: Software Ver.3.1.3.0, Data Ver.1.1.E.2

The following points have been upgraded.

2014.3.17

  • Changed the source code from Visual Basic to Delphi.
  • Added new models in association with the release of A5 and A5Ⅱ series.
  • Added CAD data function.
  • The calculation of the regenerative resistor load ratio was changed to use the S-curve torque at the peak wattage.
  • The result of the effective torque calculation at the S-curve shapes of acceleration and deceleration being selected was modified to meet the same result of the effective torque calculation at the linear shapes of acceleration and deceleration being selected.
  • Revised some data of the inertia ratio.
  • Revised some data of the external regenerative resistor.
  • Revised some data of the maximum speed.

Version-Up Information: Software Ver.3.1.2.0, Data Ver.1.1.E.1

The following points have been upgraded.

2013.5.21

  • The description of the name of the company of a related document is changed along with the company name change.
  • Added “Chinese Language” (Simplified Chinese) support to the language switching function.
  • With the addition of new language, the layout of the “screen display and print sheet” was modified.

Version-Up Information: Software Ver.3.1.0.3, Data Ver.1.1.0.3

The following points have been upgraded.

2009.12.22

  • Added new models in association with the release of A5 series and A5E series.
  • The start defect problem when the language of different decimal separator use is set is corrected.

Version-Up Information: Software Ver. 3.1.0.2, Data Ver. 1.1.0.2

The following points have been upgraded.

2008.11.14

  • The description of the name of the company of a related document is changed along with the company name change.
  • The print layout is improved.
  • The print preview function is improved.

Version-Up Information: Software Ver. 3.1.0.1, Data Ver. 1.1.0.1
[Only Japanese version]

The following points have been upgraded.

2008.11.14

  • CAD data catalog software used for CAD data output was changed from Panasonic_Motor_PowerPARTS into PARTdataManager.
  • All of the CAD data output functions were revised as corresponding CAD data catalog software was changed.
  • Corrected a problem with display.
  • Corrected problems with internal calculation and database linkage processing.
  • Changed manual (help) format.

Version-Up Information: Software Ver. 3.0.0.3, Data Ver. 1.0.0.6

The following points have been upgraded.

2007.4.27

  • Added A4-series "MDMAseries 7.5kW and MGMAseries 6.0kW and MHMAseries 7.5kW".
  • Added A4 and A4Pseries "Straight Shaft"version.
  • Added the input item of "mass of the belt" in the mechanism element of the "Timing belt" in motor capacity selection calculation.

Version-Up Information: Software Ver. 3.0.0.3, Data Ver. 1.0.0.5

The following points have been upgraded.

2006.1.31

  • Debugged;
    1. A part # of a cable(optional) forMAMA series/A4 andA4P series.
    2. Judgement level of OK,RMK,NG in case of S-curve motion.

Return to top

 

Return to top