【Notification of Manufacturer Change for Panasonic Industrial Devices SUNX Products and Panasonic Industrial Devices SUNX Tatsuno Products】
From April 1, 2024, the terms "Panasonic Industrial Devices SUNX Co., Ltd." and "Panasonic Industrial Devices SUNX Tatsuno Co., Ltd."
in this page and in the manuals and other documents to be downloaded will all be replaced with "Panasonic Industry Co., Ltd." and applied accordingly.
Business > Industrial Devices > Automation Controls Top > FA Sensors & Components > Sensors > Area Sensors > General Purpose & Slim Body Area Sensor NA2-N > Specifications
Partly Order Discontinued
|
|
Number of beam channels | 8 | 12 | 16 | 20 | 24 | 28 | ||
---|---|---|---|---|---|---|---|---|
Model No. | NPN output | NA2-N8 | NA2-N12 | NA2-N16 | NA2-N20 | NA2-N24 | NA2-N28 | |
PNP output | NA2-N8-PN | NA2-N12-PN | NA2-N16-PN | NA2-N20-PN | NA2-N24-PN | NA2-N28-PN | ||
CE marking directive compliance | EMC Directive, RoHS Directive | |||||||
Sensing height | 140 mm 5.512 in |
220 mm 8.661 in |
300 mm 11.811 in |
380 mm 14.961 in |
460 mm 18.110 in |
540 mm 21.260 in |
||
Sensing range | 5 m 16.404 ft | |||||||
Beam pitch | 20 mm 0.787 in | |||||||
Sensing object | φ30 mm φ1.181 in or more opaque object (completely beam interrupted objects) | |||||||
Supply voltage | 12 to 24 V DC ±10 % Ripple P-P 10 % or less | |||||||
Power consumption |
Emitter | Job indicator ON | 0.7 W or less | 0.8 W or less | 0.9 W or less | 1.0 W or less | 1.1 W or less | 1.2 W or less |
Job indicator OFF | 0.6 W or less | 0.7 W or less | 0.8 W or less | 0.9 W or less | 1.0 W or less | 1.1 W or less | ||
Receiver | Job indicator ON | 0.7 W or less | 0.8 W or less | 0.9 W or less | 1.0 W or less | 1.1 W or less | 1.2 W or less | |
Job indicator OFF | 0.6 W or less | 0.7 W or less | 0.8 W or less | 0.9 W or less | 1.0 W or less | 1.1 W or less | ||
Output | <NPN output type> NPN open-collector transistor • Maximum sink current: 100 mA • Applied voltage: 30 V DC or less (between output and 0 V) • Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current) <PNP output type> PNP open-collector transistor • Maximum source current: 100 mA • Applied voltage: 30 V DC or less (between output and +V) • Residual voltage: 2 V or less (at 100 mA source current), 1 V or less (at 16 mA source current) |
|||||||
Utilization category | DC-12 or DC-13 | |||||||
Output operation | ON when all beam channels are received (OFF when one or more beam channels are interrupted) |
|||||||
Short-circuit protection | Incorporated | |||||||
Response time | 10 ms or less (12 ms or less when the interference prevention function is used) | |||||||
Indicators | Emitter | Emitting indicator: Green LED x 2 (light up during emission; one LED lights up for Frequency A setting, both LEDs light up for Frequency B setting) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch) |
||||||
Receiver | Operation indicator: Red LED (lights up when one or more beam channels are interrupted) Stable incident beam indicator: Green LED (lights up when all beam channels are stably received) Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch) * When an excess current flows through the output, the stable incident beam indicator and the operation indicator on the receiver blink simultaneously due to operation of the short-circuit protection circuit. |
|||||||
Interference prevention function | Incorporated | |||||||
Test input (emission halt) function | Incorporated | |||||||
Pollution degree | 3 (Industrial environment) | |||||||
Protection | IP40(IEC) | |||||||
Ambient temperature | –10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: –10 to +60 ℃ +14 to +140 ℉ |
|||||||
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH | |||||||
Ambient illuminance | Incandescent light: 3,000 lx or less at the light-receiving face | |||||||
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure | |||||||
Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure | |||||||
Vibration resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each | |||||||
Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each | |||||||
Emitting element | Infrared LED (Peak emission wavelength: 870 nm 0.034 mil (Note 3), modulated) | |||||||
Material | Enclosure: Heat-resistant ABS, Lens cover: Polyester, Indicator cover: Acrylic | |||||||
Cable | 0.2 mm2 4-core cabtyre cable, 3 m 9.843 ft long | |||||||
Cable extension | Extension up to total 25 m 82.021 ft is possible for both emitter and receiver, with 0.2 mm2, or more, cable. | |||||||
Weight (Total weight of emitter and receiver) |
Net weight: 350 g approx. Gross weight: 550 g approx. |
Net weight: 400 g approx. Gross weight: 600 g approx. |
Net weight: 450 g approx. Gross weight: 650 g approx. |
Net weight: 500 g approx. Gross weight: 700 g approx. |
Net weight: 570 g approx. Gross weight: 750 g approx. |
Net weight: 650 g approx. Gross weight: 800 g approx. |
Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2) Obtain the current consumption from the following equation.
Current consumption = Power consumption ÷ Supply voltage
(e.g.) In case of NA2-N8 (when job indicator lights up)
When the supply voltage is 12 V, the current consumption of the emitter is: 0.7 W ÷ 12 V ≈ 0.058 A = 58 mA.
3) Peak emission wavelength has been changed from production in March, 2017.
Requests to customers (Automation Control Components & Industrial Device) [Excluding specific product]
Requests to customers (Automation Control Components & Industrial Device) [For specific product]
Requests to customers (FA Sensors & Components [Excluding motors])
Requests to customers (Dedicated to industrial motors)