Communication Cassette (AFP7CCET1/AFP7CCRET1) Firmware Ver.1.05

Information you need to know before using the software (Essential reading)

About Communication Cassette (AFP7CCET1/AFP7CCRET1) Firmware Ver.1.05

Communication Cassette (AFP7CCET1/AFP7CCRET1) Firmware Ver.1.05 is used to upgrade the communication cassette to Ver.1.05. To install this firmware, take the method below;

Version-Up Information (Ver.1.03 to Ver.1.05) (December 5, 2022 update)

  • Added a function to notify the CPU unit of an error when the settings are not saved correctly or when the watchdog is activated. (X2B, X2C, X2D)
  • Fixed the problem that it may take 15 seconds to receive the data sent from the other device when the non-communication disconnection time is set to 0 seconds in general-purpose communication.
  • Fixed the problem that prevented connection to a different port even if the unit number was changed when the connection destination was set to another port with the same IP address during MEWTOCOL master communication.

Version-Up Information (Ver.1.02 to Ver.1.03) (August 29, 2016 update)

  • There was a bug during general-purpose communication.
    The communication will stop when transmitting and receving the data happens at the same time. This bug has been fixed.

Version-Up Information (Ver.1.00 to Ver.1.02) (November 14, 2014 update)

  • Error of the TCP / IP timeout behavior has been corrected.
  • When data with ET-LAN header has been received by the general-purpose communication, error where delete the ET-LAN header has been fixed.
  • It has been fixed that the mode of the cassette is in initialization mode, in the OFF state for the switch1 (initialization mode switch).

Return to top


Be aware of the following points listed below.
This software is freeware. The copyright for this software is held by Panasonic Industrial Devices SUNX Co., Ltd. By using this software it is assumed that you agree to "Conditions of Use" presented below.

Conditions of Use

  • Panasonic Industrial Devices SUNX does not warrant anything regarding the use of this software.
  • Panasonic Industrial Devices SUNX will not assume responsibility of any sort for direct, indirect, repercussive, resulting or special damage that results from using this software or from the operation of the software itself.
  • Panasonic Industrial Devices SUNX does not restrict the use, copying or distribution of this software.
    However, when copying or distributing, Panasonic Industrial Devices SUNX prohibits the procurement of fees other than the cost of media, and prohibits the applying of restrictions in use of the software.

How to Install

1.Click on the title of the file name (listed below) that you want to download and indicate the download destination.

*When you already have indicated the download destination, the file will be downloaded automatically.

Title Language Version File size Update
fp7ccet1_v105.bin EN 1.05 192.0KB December 5, 2022

2.When the download is finished, take the following procedure to upgrade the firmware.

・Communication Cassette (AFP7CCET1/AFP7CCRET1) Firmware [Upgrade Procedure]

Title Language Version File size Update
afp7ccet1_verup_procedure_e.pdf EN 497.9KB December 5, 2022


3.After completing the installation, reboot the FP7 controller.


Return to top