Control Unit ELC500 Firmware Ver.1.12
Information you need to know before using the software (Essential reading)
About Control Unit ELC500 Firmware Ver.1.12
The latest firmware for Control Unit ELC500 is available.
Configurator EL500 should be installed to use the latest firmware. If you don't have it, download it from the software download page.
Caution
Be aware of the following points listed below.
The copyright for this software is held by Panasonic Industrial Devices SUNX Co., Ltd.
By using this software it is assumed that you agree to "Conditions of Use" presented below.
You may not reverse-engineer, decompile, or disassemble this software.
How to Install
1.Click on the title of the file name (listed below) that you want to download and indicate the download destination.
*When you already have indicated the download destination, the file will be downloaded automatically.
 |
Title | Language | Version | File size | Update |
|---|---|---|---|---|---|
| elc500_v0112.zip | EN | 1.12 | 2.3MB | April 19, 2023 |
After the download is completed, unzip the ZIP file.
2.Transfer the decompressed file to the Control Unit ELC500.
- Connect the Control Unit ELC500 to be upgraded to the personal computer via USB, and start Configurator EL500.
- Change the operation mode of the main unit switch to "STOP".
- Click Create "New file" and select "Firmware Update" from the "Option".
- Select the unzipped file and click "Write".
- The decompressed file is transferred and the upgrade is completed.
3.After completing the Version Up, reboot the Control Unit ELC500.
[Notes]
The Control Unit ELC500 does not support Version upgrade with Configurator WD.
